Wiltron 560 / Anritsu 560 System Components for Scalar Network Analyzer

This handy wooden case comes with several system components used for the scalar network analyzer.

Components included:

 -560-98 SWR Autotester (10 MHz to 18.5 GHz)
- RF Detector 560-7N50 (10 MHz to 18.5 GHz)
- Adapter 50 ohm 34NN50A (10 MHz to 18.5 GHz)
- Type N to N Connectors (qty: 2)
- Wiltron 22NF50 Open Short Site Master SiteMaster Antenna Cable
- Pamona 3781-12 Probes
-1 Automated Scalar Network Analyzer Cartridge

 560-98 SWR Autotester (10 MHz to 18.5 GHz)

•     Up to 35 dB directivity
•     10 MHz to 40 GHz range
•     Input port impedance: 50 Ω
•     Insertion Loss (from input to test port): 6.5 dB nominal
•     Detector Output Polarity: Negative
•     Maximum Power Input: 0.5 watts (+27 dBm)
•     Output Time Constant: 2 ms
•     Cable Length: 122 cm (4 feet)
•     Test port connectors to fit most measurement applications; avoids use of adapters
•     560-98K50: Type K(m) connection, 560-98KF50: Type K (f) connection

RF Detector 560-7N50 (10 MHz to 18.5 GHz)

• Frequency range: 10 MHz to 18 GHz
• Measurement range of –55 dBm to +16 dBm
• Return loss: 16 dB, <0.04 GHz; 22 dB, <8 GHz; 17 dB, <18 GHz
• Maximum input power: 100 mW (+20 dBm)
• 50 Ohm impedance
• Connector: N(m)
• Cable length: 122 cm (4 ft)
  

Adapter 50 ohm 34NN50A (10 MHz to 18.5 GHz)

• Precision N(M) to N(M) adapter
• 50 ohm

Wiltron 22NF50 Open Short Site Master SiteMaster Antenna Cable

• OPEN / SHORT, 50 Ohm / 2 x N-Buchse

Pamona 3781-12 Probes

• Minigrabber Test Clip Patch Cord, 12 Inch, Black
• Wire: 20 AWG. 41 × t.c. PVC insulated, 2.21 mm (0.087) O.D. Rating: 300 VAC, 12 amps.

Automated Scalar Network Analyzer Cartridge

• Program Cartridge