Product Description
Wiltron 560 / Anritsu 560 System Components for Scalar Network Analyzer
This handy wooden case comes with several system components used for the scalar network analyzer.
Components included:
-560-98 SWR Autotester (10 MHz to 18.5 GHz)
- RF Detector 560-7N50 (10 MHz to 18.5 GHz)
- Adapter 50 ohm 34NN50A (10 MHz to 18.5 GHz)
- Type N to N Connectors (qty: 2)
- Wiltron 22NF50 Open Short Site Master SiteMaster Antenna Cable
- Pamona 3781-12 Probes
-1 Automated Scalar Network Analyzer Cartridge
560-98 SWR Autotester (10 MHz to 18.5 GHz)
- Up to 35 dB directivity
- 10 MHz to 40 GHz range
- Input port impedance: 50 Ω
- Insertion Loss (from input to test port): 6.5 dB nominal
- Detector Output Polarity: Negative
- Maximum Power Input: 0.5 watts (+27 dBm)
- Output Time Constant: 2 ms
- Cable Length: 122 cm (4 feet)
- Test port connectors to fit most measurement applications; avoids use of adapters
- 560-98K50: Type K(m) connection, 560-98KF50: Type K (f) connection
RF Detector 560-7N50 (10 MHz to 18.5 GHz)
- Frequency range: 10 MHz to 18 GHz
- Measurement range of –55 dBm to +16 dBm
- Return loss: 16 dB, <0.04 GHz; 22 dB, <8 GHz; 17 dB, <18 GHz
- Maximum input power: 100 mW (+20 dBm)
- 50 Ohm impedance
- Connector: N(m)
- Cable length: 122 cm (4 ft)
Adapter 50 ohm 34NN50A (10 MHz to 18.5 GHz)
- Precision N(M) to N(M) adapter
- 50 ohm
Wiltron 22NF50 Open Short Site Master SiteMaster Antenna Cable
- OPEN / SHORT, 50 Ohm / 2 x N-Buchse
Pamona 3781-12 Probes
- Minigrabber Test Clip Patch Cord, 12 Inch, Black
- Wire: 20 AWG. 41 × t.c. PVC insulated, 2.21 mm (0.087) O.D. Rating: 300 VAC, 12 amps.
Automated Scalar Network Analyzer Cartridge
- Program Cartridge