Description:
The rotary indexing tables of our TC series are characterized by: Robust construction Soft jerk-free operation High loading capacity Short indexing times Long service life High reliability Simple actuation.

Technical data TC 150 T

• Tool plate diameter: recommended up to 800 mm
• Dial plate diameter: 150 mm
• Direction of rotation: clockwise - counter clockwise or reciprocating
• Indexing: 4
• Cycle frequency: Up to 210 cpm depending on inertia loading and number of stops
• Voltage: 230 / 400 V 50 Hz special voltages upon request
• Drive motor: 0 35 kW
• Indexing accuracy: No. of indexing 2-12: 40
• No. of indexing 16-24: 45 (in angular seconds)
• Indexing accuracy (at 150 mm)
• Radian measure: No. of indexing 2-12: 0 015 mm
• No. of indexing 16-24: 0 016 mm
• max. flatness of dial plate: (at 150 mm) 0 01 mm
  
  3 Phase Motor Specifications:
• Break: 24 V DC 1.0 Nm
• cosf: 0.63
• Watts: 0.035 kW
• D 230 V 0.64 A 50 Hz 650 RPM 1/min / Y 400 V 0.37 A 50 Hz 650 RPM 1/min OR
• D 277 V 0.53 A 60 Hz 780 RPM 1/min / Y 480 V 0.32 A 60 Hz 780 RPM 1/min

Complete specifications for the TC 150T available upon request. "

NOTE:  The photos are the actual unit. 

You Will receive the TC 150T with the Main Table and Motor.
You Will receive the vertical post supporting the table.
You will Not receive the small fixture in the middle of the plate