Product Description
The TM5 transformer module is used to provide and distribute isolated AC bus supply voltages for up to four Aerotech controllers. It is configured at the factory to provide 28 VAC, 56 VAC, 115 VAC, or a combination of these voltages with a total output power capability of 500 watts. Additionally, the TM5 distributes the applied AC line voltage to each of the auxiliary supply outputs for powering the auxiliary power inputs of other Aerotech products.
Type Isolation
AC Input Configurations 100 VAC, 115 VAC, 200 VAC, 230 VAC
Peak AC Input Inrush Current 32 Apk 200 Apk
Operating Frequency 50/60 Hz
Maximum Continuous Transformer Output Power 300 watts max @ 20°C 500 watts max @ 20°C
Peak Transformer Output Power 400 watts max @ 20°C 800 watts max @ 20°C
Short Circuit/Over Current Protection AC input 10 A breaker/switch (supplementary protection only); 100 VAC/115 VAC configurations contain 4 A slow-blow fuse connected to transformer primary winding; 200 VAC/230 VAC configurations contain 3 A slow-blow fuse connected to transformer primary winding AC input 10 A breaker/switch (supplementary protection only); 100 VAC/115 VAC configurations contain 8 A slow-blow fuse connected to transformer primary winding; 200 VAC/230 VAC configurations contain 4 A slow-blow fuse connected to transformer primary winding
Thermal Protection Integral transformer thermal switch is normally closed. Thermal switch opens when internal temperature of transformer reaches 110°C. Integral transformer thermal switch is normally closed. Thermal switch opens when internal temperature of transformer reaches 110°C.
Secondary Winding Configuration 28 VAC (40 VDC bus); 56 VAC (80 VDC bus); ±10 VDC, ±20 VDC, ±30 VDC, ±40 VDC 28 VAC (40 VDC bus); 56 VAC (80 VDC bus); 112 VAC (160 VDC bus)
+24 VDC Output 0.9 A max 0.9 A max