Product Description
Intek Inc. 210R-IDT-TUL Flowmeter with TU Sensor
Rheotherm precision flow meters are designed to provide accurate representation of fluid flow rate.
Flow Sensor is as follows:
- TUL (6") 1/8 (SS) (RAD) (1/8"Swagelok)
- SN07068-1
- Max temp.: 60 degC Max press,: 500psig
Key features
Nonintrusive flow measurement- For pipe sizes from 0.030 to 2 inches, flow sensing can be done from outside the flow tube.
No moving parts- There are no rotating, translating, undulating or oscillating parts to wear, stick, break or fatigue.
Chemical compatability- The wetted surface(s) can be any number of corrosion resistant metals or alloys. Most TU or TUL type sensors can be amde with no internal joints or seals.
Flexibility- Rheotherm meters can be ordered calibrated for mass or volumetric units or in average velocity. Flow rate , totalization and fluid temperature displays or output signals are available, as well as rangeability up to 100:1 or more.
Fluid pressure options to 10000 psi
Withstands over-ranging- No damage or change in calibration will occur due to excessive flow rates many times higher than calibration range.
Immunity to shock and vibration.