Product Description
The P6434 Mass Termination Probe allows you to connect 34 logic analyzer channels to a microprocessor probe adapter or directly to your target system in one fourth the physical area needed to connect standard probes.
You can reduce the vertical clearance dimension to less than a half inch if you use the low-profile extender. If you use a P6434 Reduced Bias Voltage adapter, you can reduce the pull-up voltage that the P6434 probe delivers to the system under test. The pull-up voltage reduces from 2.2 volts to 1.1 volts at the same time the DC input resistance changes from 20 kΩ to 10 kΩ. If you are using TLA6xx or TLA7Lx/Mx/Nx/Px/Qx logic analyzer modules you can take advantage of the new compression footprint and eliminate the need for Mictor connectors in your target system with a Compression-on-PCB to P6434 Mictor adapter.
7 in stock
Additional specifications available upon request
You can reduce the vertical clearance dimension to less than a half inch if you use the low-profile extender. If you use a P6434 Reduced Bias Voltage adapter, you can reduce the pull-up voltage that the P6434 probe delivers to the system under test. The pull-up voltage reduces from 2.2 volts to 1.1 volts at the same time the DC input resistance changes from 20 kΩ to 10 kΩ. If you are using TLA6xx or TLA7Lx/Mx/Nx/Px/Qx logic analyzer modules you can take advantage of the new compression footprint and eliminate the need for Mictor connectors in your target system with a Compression-on-PCB to P6434 Mictor adapter.
7 in stock
Additional specifications available upon request