Product Description
Sensing method Through-beam
Sensing distance 0 m to 1 m
Standard sensing object Opaque: 2 mm dia. Min.
Minimum sensing object 2 mm dia. Min.
Directional angle Emitter:2 to 20 DEG
Receiver:2 to 70 DEG
Light source Red LED (650nm)
Power supply voltage 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
Current consumption Emitter: 10mA DC Max., Receiver: 20mA DC Max.
Control output (Output type) PNP open collector output
Control output (Load current) 0 to 50 mA
Control output (Residual voltage) (DC) 1 V Max. (Load current: Less than 10mA)
(DC) 2 V Max. (Load current: 10 to 50mA)
Operation mode Dark-ON
Load power supply voltage 26.4 VDC Max.
Protective circuit Surge suppressor
Output short-cut protection
Output reverse polarity protection
Power supply reverse polarity protection
Response time 1 ms Max .
Note: Wires vary in length