Accessories included:
Charge plate extension cable (5ft.)
Ground cable
Power cord
Operator’s Manual and case

SPECIFICATIONS
All specifications are referred to PLate VColtage unless otherwise specified.
Charging Voltage:    ±10 to ±1000 volts, differential
                                  adjustable 10 volts to 100 volts in 1 volt increments
Zero Stability:   <100mV/sec
Timer:               0.1 to 999.9 seconds in 0.1 sec increments
                         1000 to 9999 seconds in 1 sec increments                      

Start Voltages:  1000 volts ±0.3% standard, adjustable
                            between 10 and 1000 volts in 1 volt increments

Stop Voltages:  100 volts ±3% standard, adjustable
                           between 0 and 995 volts in 1 volt increments

Peak Displays:  ±peak voltage during float mode
Power:              90-250 VAC 50/60 Hz, internal 12 volt
                          battery with built-in charger (6hr/charge)                                  

Voltage   Output   Monitor:divide by 200, 0.1%, speed of response
<10ms
Display:             240 x 64, character/graphic Voltage Display:
                           3 ½ digit, ±1.0 volt resolution                       

Timer Display: 4 digit
 
Accuracy:    electrometer ±0.1% of reading, ±1 volt
                    referred to input Bandwidth:  1kHz at 20V p-p , 10Hz at 2000V p-p                

Zero Drift: <100mV/sec
Charge Plate Capacitance: 20pF, ±5%

Plate Self-discharge:       <200mV/sec
Operation Temperature: 5° C to 35°C
Temperature Sensor:      ±2° C typ
Operating RH:                to 80%, non-condensing
Humidity Sensor:          ±5% typ from 10% to 80% RH @25° C