Product Description
The GA Series high-performance pumps provide precise and pulseless flows from as low as 1 ml/min. Featuring Micropump's patented suction-shoe design, GA Series pumps self-compensate for wear, ensuring near zero slip and a longer pump life. Once started the pump should prime if it has not already been filled with fluid. If the pump fails to prime, stop the pump and fill the pump head with liquid.
DC Brush Drives for the popular GA, GB, and GJ series pumps. This variety enables our products to fit a broad range of low-flow applications. The small footprint of the "C" mount motors designed for Series GA "C" mount pumpheads allows for a very small package size. This drive is 24 VDC and has the ability to vary the speed by adjusting the supplied voltage. All Micropump DC Brush Drives are RoHS compliant.
GA-V23.J8DSA Magnetic Drive Gear Pump
Model: GA-V23.J8DSA
P/N L23789
- G = Product Type; Gear Pump
- A = Product Series; Series GA, 21 Bar (300 psi) Max System Pressure (MAWP), 1/8-27 (F) NPT Side Ports
- - = Modifier; Standard Design
- V23 = Gear Set Displacement Range 0.084 mL/rev
- J8 = Gear Material; PEEK-Pin Drive, Max Differential Pressure 2.8 Bar (40 psi), Fluid Temp Range -46/177degC (-50/350degF)
- D = Static Seals; EP Temp Range -46/149degC (-50/300degF)
- S = Base Materials; SS316
- A = Drive Mount; MP Housing, Max System Pressure (MAWP) 21 Bar (300 psi)
- Flow Rate @3450 RPM: 0.290 L/min (0.077 gpm)
- Flow Rate @2850 RPM: 0.245 L/min (0.065 gpm)
- Max Speed: 8000 rpm
- Viscosity Range: 0.2-1500 centipoise
- Weight (Pumphead only) 0.34kg (0.75 lbs)
DC306A 81101 DC Brush Type Permanent Magnet Drive
- DC = DC Brush Type Permanent Magnet Drive
- 306 = Model
- A = Mount Code
- Drive Type: Brush
- Enclosure Note: IP55/Totally enclosed non-ventilated, suitable for humid, dusty atmospheres, requires good ventilation
- Speed Range RPM: 500-4000
- Max Rated Torque NMn/In-oz: 212/30
- Nominal Watts/HP: 112/0.16
- Power Source: 24 VDC
- Connection: Wire leads
- Weight (max): 1.14kg / 2.51 lbs
