FPM-4 Four channel AC-powered, 48-volt phantom power supply. Will operate with any microphone requiring from 12 volts to 48 volts @ up to 10 ma. Very low noise, distortion, and crosstalk.

The FPM series power supplies will power any condenser or electret type microphone requiring phantom power of 12 vdc to 48 vdc. Each channel is individually regulated to guarantee the lowest possible noise and crosstalk delivering up to 10 ma per channel. Each channel is also completely protected from shorts and other potential problems. The inputs and outputs are AC coupled to protect the outputs from any DC leakage. Though each module is powered by it’s own FPS-1 wall mounted 120 vac power supply. The units are designed to be completely modular, this modular design will allow up to twelve channels to operate from one FPS-1 supply.

Specifications
Channels Four
Frequency Response + 0/ -, 01 dB 20 Hz -20 kHz
Bandwidth + 0 dB, -3 dB 2 Hz -200 kHz
Distortion < 0.001 %
Signal / Noise > 120 Db
Crosstalk 140 Db
Input Connectors 3 PIN XLR
Output Connector 3 PIN XLR
Power Requirements 24 V AC @ 120 ma .

Choose 4 pcs of

5' BNC to XLR cables or
2' XLR to XLR  cables