Home›Products›Telecom Test Equipment›Telecom & Protocol Analyzers›BCP Broadband Communications Products / JDSU / JDS Uniphase 320A High Gain 3 GHz Optical Receiver, Model 320A-33ST
BCP Broadband Communications Products / JDSU / JDS Uniphase 320A High Gain 3 GHz Optical Receiver, Model 320A-33ST
sku65681 — low stock
Request a Quote
By BCP
<p>Our unit is branded BCP.  JDSU acquired BCP and changed the name to JDS Uniphase</p><p>The receiver detects and converts optical signals into electrical signals for the purpose of transmitter waveform analysis and testing, including error rate testing. It is optimized for analysis of high-sp…
Description
<p>Our unit is branded BCP.  JDSU acquired BCP and changed the name to JDS Uniphase</p><p>The receiver detects and converts optical signals into electrical signals for the purpose of transmitter waveform analysis and testing, including error rate testing. It is optimized for analysis of high-speed, low-level optical signals from single-mode fiber sources. The high bandwidth (3 GHz) and high gain (2500 V/W) enable detection and analysis of up to 2.5 Gb/s signals at levels down to below -30 dBm. The receiver is also equipped with a high-level input port for direct connection of laser sources at power levels up to +3 dBm without overload.
The Model 320A 3 GHz O/E Receiver is the one solution that provides users with a low-cost, high quality instrument for optical eye pattern analysis and testing at low to high power levels.</p><p> </p><p>The receiver consists of a 3 GHz bandwidth optical-to-electrical (O/E) converter (1100 to 1600 nm) and a 3 Gb/s limiting amplifier. The detector out port for the O/E converter is DC coupled and automatically nulled to <±100 μV DC. The nulling is automatically performed when the receiver does not have an optical input.</p><p>
</p><p>FEATURES & SPECIFICATIONS:
Detector bandwidth DC 3 GHz
High O/E gain (2500 V/W)
Limiting amplifier included
No gain or offset adjustments needed
Equipped with universal connectors
High Power Optical Input: 1.0 mW (0 dBm) max
Low Power Optical Input: 200 µW (-7 dBm) max
Bandwidth (-3 dB): DC to 2.5 GHz minimum, 3.0 GHz typical
 </p><p> </p><p>Addiitonal specifications available upon request.</p>
The Model 320A 3 GHz O/E Receiver is the one solution that provides users with a low-cost, high quality instrument for optical eye pattern analysis and testing at low to high power levels.</p><p> </p><p>The receiver consists of a 3 GHz bandwidth optical-to-electrical (O/E) converter (1100 to 1600 nm) and a 3 Gb/s limiting amplifier. The detector out port for the O/E converter is DC coupled and automatically nulled to <±100 μV DC. The nulling is automatically performed when the receiver does not have an optical input.</p><p>
</p><p>FEATURES & SPECIFICATIONS:
Detector bandwidth DC 3 GHz
High O/E gain (2500 V/W)
Limiting amplifier included
No gain or offset adjustments needed
Equipped with universal connectors
High Power Optical Input: 1.0 mW (0 dBm) max
Low Power Optical Input: 200 µW (-7 dBm) max
Bandwidth (-3 dB): DC to 2.5 GHz minimum, 3.0 GHz typical
 </p><p> </p><p>Addiitonal specifications available upon request.</p>