FW Bell CG104D Hand-held Non-contact Current Meter Gun with 3 1/2 Digit LCD Readout

Specifications:

Operating Scale

Full scale: +/- 500A dc or ac

Frequency: dc to 1 kHz

Accuracy:

dc & ac (15 Hz to 100 Hz): +/-2.5% FS

ac (100 Hz to 1kHz) +/-3.5 % FS

Overrange: -10.0 % of reading 500 A-750 A, -25.0% of reading 750 A-1000 A

Frequency response:

Readout ac mode: 20 Hz to 1 kHz

Output jacks:  dc to 1 kHz

Resolution: 1.0 A dc or ac

Heating Limitation: 1000 A-kHz

Size: 9" x 4 - 1/2" x 1-7/16" (230mm 115mm x 37mm)

Weight: 1 lb.

Features:

• Reads dc, ac and ac-on dc currents.
• 3 1/2 digit liquid crystal display
• oscilliscope and Recorder Outputs
• Easy, safe, one-hand operation
• Bipolar measurement capability
• Clamps around conductors up to 3/4" diameter
• Fully- portable, 20-hour minimum use on internal batteries
• Press to Read Switch extends battery life
• Low Battery Indicator
• Automatic Reading hold

Applications:

• Measure ground currents dc and ac
• Measure power supply ripple
• Measure curent distribution in multiple mesh systems
• Measure current balance (two wires) dc or ac
• Measure telephone ringing currents
• Measure starting currents without introducing impedance
• Measure capacitor leakage
• Measure transformer currents
• Measure battery currents
• Display current transients to limit of frequency response
• Measure current distribution and perform ripple tests in plating operations
• Read currents in HV conductors through non-magnetic insulation

* Further specifications available upon request.

Unit comes with operators manual.