Toronto Surplus & Scientific Inc.

	Adept 10190-11000 HPS Sensor HD Call for price Please visit: www.torontosurplus.com for further details. Call for price
(Photo shy)	Alfred Electronics S111 RF Sampler - 1 to 4 GHz, ±0.75 dB Type N female Connectors (3) Call for price Please visit: www.torontosurplus.com for further details. +10 dBm rated, 20 dBm max. Approx. 6 3/8" x 1 1/8" x 1" not including connectors. Call for price
	Ando AQ-1934 Optical Sensor, Fiber Call for price Please visit: www.torontosurplus.com for further details. Call for price
	Ando AQ-1939 Optical Head, Fiber Call for price Please visit: www.torontosurplus.com for further details. Call for price
(Photo shy)	Avex Oscilloscope Probes - BRAND NEW Please visit: www.torontosurplus.com for further details. We have 2 different Avex probes: Part # 510-10-1-A, 100 MHz with working voltage 600VDC (max) not switchable, with readout feature @ $29.95 US each. Part # 500-10-1-HA, 300 MHz with working voltage 600VDC (max) with readout feature @ $65.00 US each. These prices are based on the purchase of a scope + probe. Please add 10% if you are not purchasing a scope.

B+K Precision Dynascan TP-28 Temperature Probe
Call for price Please visit: www.torontosurplus.com for further details.

SPECIFICATIONS:

Range: -50^oC / -58^oF to +150^oC / +302^oF

Max Temperature: Probe Tip, 160^oC / 320^oF

Sensitivity: 10 mVDC per ^oC or ^oF

Battery: 9V Carbon Zinc type 1604, 216 or equivalent (not included)

Call for price

Boonton Electronics 91-12F RF Probe for 91 and 92 RF Voltmeters
$ 195.00 US Please visit: www.torontosurplus.com for further details.

SPECIFICATIONS:

Freq. Range: 00kHz to 1.2Ghz

Capacitance: 2.5pF

Max AC voltage: 10V

Max DC voltage: 400V

Without probe tip
$ 195.00 US

Dytran 2200V5 Pressure Sensor, LIVM - Excellent Condition, Like New (and may in fact be new)
$ 85.00 US each Please visit: www.torontosurplus.com for further details.
5000 psi range, 1 mV/psi
4 in stock.
$ 85.00 US each

Electro-Metrics MFC-30 / EM-6882 Magnetic Field Probe 20 MHz to 230 MHz (Blue)
Call for price Please visit: www.torontosurplus.com for further details.
The MFC-30 operates in conjunction with any 50 ohm input impedance receivers, and can be use with the EM-2115 Interference Analyzer/Receiver. The probe is non-calibrated and hand held for versatility and mobility.
EM-6882 Magnetic Field Probes are particularly advantageous for searching for RF leakage. The probes are electrostatically shielded and are therefore sensitive only to the magnetic component of the electromagnetic field. Each probe has a rubberized covering and is distinctively color-coded by frequency range for easy identifications.
The probes are especially useful in determining the side of an article under test, which radiates the highest level prior to running a MIL-STD, or FCC radiated emissions test.

Matches RF Bands: 1-5, 5-10 and 11-13 on the EM-2115 Interference Analyzer/Receiver
Frequency: 20 MHz - 230 MHz Dimensions:
- Length 240 mm (9.5")
- Inside Circle 50mm (2")
- Across Circle 90 mm (3.5")
- Ring Outside Diameter 92 mm (3 5/8")
Weight 454 g (1 lb)

Comes with the Manual
Call for price

Electronic Micrometer, Ultra Sensitive with 6 Foot Leads (approx.) Moore, Standard & System Brands
$ 195.00 US each Please visit: www.torontosurplus.com for further details.
We have the following units in stock:

Moore 13820-1 / 98215 with DIN-5 Connector (1 piece)
Moore13660-1 / MO29270-04 with 6-pin f Cannon Connector MS3116F10-6S
Standard 36871 with DIN-5 Connector (1 piece)
Standard 61964 with DIN-5 Connector (1 piece)
SystemE 20437 with DIN-5 Connector (2 pieces)
20197 / 01798 with DIN-5 Connector (1 piece)

Please specify item when ordering
$ 195.00 US each

(Photo shy)	Fluke 36 Clamp Meter AC/DC/True RMS - MINT, New Condition in Original Box (precursor to Fluke 336A & Fluke 336) $ 195.00 US Please visit: www.torontosurplus.com for further details. The Fluke Model 36 is a rugged, reliable clamp meter that measures ac and dc current and volts. This versatile clamp meter offers True-rms sensing and MAX Hold for measuring inrush current or maximum load on a circuit. Tapered jaws and slim profile let you get at cables in tight places. Use it for troubleshooting in industrial, commercial, avionics and marine environments. SPECIFICATIONS: DC Current: Range: 1000A, 200A DC Volts: Range: 600V/200V AC Current (45-400Hz): Range: 600A/200A AC Volts (45-400Hz) Range: 600V/200V Ohms Range: 200 Ohms Comes with Soft Case, Leads & Manual Complete specifications available upon request. $ 195.00 US
(Photo shy)	Fluke 80i-1010 / i1010 DC/AC Clamp-on Current Probe - LIKE NEW $ 175.00 US Please visit: www.torontosurplus.com for further details. The 80I-1010 is a battery powered clamp-on current probe that is used with a voltmeter to measure dc currents up to 1000 amps or ac to 700 amps. The jaws will accommodate a single 750 MCM THHN or two 500 MCM THHN conductors. A convenient thumbwheel ZERO control improves accuracy of dc currents down to 1 amp. Typical frequency response is -3 dB at 6kHz. SPECIFICATIONS: Current Range: DC - 1A to 1000A / AC - 1A to 700A Basic Accuracy 2% + 1 A to 5% depending on Frequency and Amperage Output Signal: 1mV/A AC or DC Frequency Range: 48Hz to 400Hz Working Voltage: 600V AC rms Maximum Conductor Size: 1 ea 30 mm (1.18 inch) or 2 ea 25mm (0.98inch) diameter $ 175.00 US
	Fluke 80i-410 / i410 DC/AC Clamp-on Hall Effect Current Probe $ 115.00 US Please visit: www.torontosurplus.com for further details. Maximum Conductor Size: one 30 cm (1.18 inch) or two 25mm (0.98inch) diameter The 80I-410 ac/dc current probe extends the ac or dc apacity to 400 amps. This Hall-effect probe is relatively insensitive to conductor position within the jaws for good repeatabliity. Physical dimensions are identical to the 80i-400 and will accomodate similar conductors. Output signal 1 mV/A. The jaws will accommodate a single 750 MCM THHN or two 500 MCM THHN conductors run in parallel. SPECIFICATIONS: Specified Current Range: 5A to 400A AC or DC Usable Current Range: 2 A to 600A AC or DC Accuracy: ±(5% + 2A) DC to 62 Hz Working Voltage: 660V AC rms Maximum Conductor Size: 1 ea 30 mm (1.18 inch) or 2 ea 25mm (0.98inch) diameter $ 115.00 US
	Fluke 80k-40 High Voltage Probe, 40kV $99.00 Please visit: www.torontosurplus.com for further details. The Fluke 80k-40 40kV probe is for measuring voltages up to 40kV. It is for use with an AC/DC voltmeter or DMM. The probe achieves rated accuracy when used with and ac/dc voltmeter having an input impedance of 10 M ohms ± 1%. The probe is a precision 1000:1 voltage divider. Voltage Range - 1 kV to 40 kV dc or peak ac, 28 kV RMS AC. Input Resistance - 1000 M ohms Division Ratio - 1000:1 $99.00
	Fluke 80PK-6A Exposed Junction Probe $ 55.00 US Please visit: www.torontosurplus.com for further details. This Type K Thermocouple instrument is designed as a surface temperature probe. The temperature range of the probe is higher than flexible lead probes due to the stainless steel sheath: -196 to 816 degrees C (-40 to 527 decrees F). The temperature ratings on the handle and cable are substantially lower than the probe's measurement range. $ 55.00 US
	Fluke 80T-150 Temperature Probe -50°C to 150°C $ 75.00 US Please visit: www.torontosurplus.com for further details. The 80T-150 is a universal temperature probe designed to provide virtually all DMM's with temperature measuring capability. Primarily intended for ambient and surface measurements, the probe provides a direct temperature conversion of 1 mV per degree. In use, the temperature-to-voltage converter box is plugged into the dc input of the DMM and the probe tip exposed to the material to be measured. Max Voltage: 350V Peak Max Temp: Probe Tip 150°C Body and Cable: 70°C $ 75.00 US

Genisco GCP 52102 RF Current Probe
$ 125.00 US Please visit: www.torontosurplus.com for further details.
1 1/4" inner diameter x 1 1/4" thick, with 1 7/16" opening (max).
We do not know the frequency range.
$ 125.00 US

	High Voltage Probe Call for price Please visit: www.torontosurplus.com for further details. Call for price
(Photo shy)	HP 10008B / Agilent 10008B Oscilloscope Probe Call for prices Please visit: www.torontosurplus.com for further details. 10008B 1X, 280ohm, 59pF 1 in stock Call for prices
	HP 10017-67603 / Agilent 10017-67603 Adapter Cable Interface to 0.025 Square Pin Circuit Nodes, 300 VDC - Tektronix Comp Call for price Please visit: www.torontosurplus.com for further details. This is a slip-on adapter that provides a coaxial interface to 0.025 square pin circuit nodes. The adapter is also useful in probing computer back planes as well as wire wrap terminals. The adapter fits any standard HP and Tektronix oscilloscope probe that has a 3/16 inch diameter probe tip. To use this with an HP series EZ IC probe, an HP 10017-67604 adapter is required. The high-frequency impedance of the adapter can be improved by twisting the red and black wires around each other. Call for price
	HP 10028A / Agilent 10028A 1:1 Dual Purpose 50 ohm Miniature Probe Call for price Please visit: www.torontosurplus.com for further details. This miniature oscilloscope probe significantly reduces the problem of probing densely populated IC components or the minute conductors on modern IC circuit boards The 10028A is primarily designed for inserting signals around suspected faulty circuits SPECIFICATIONS: Attenuation: 1:1 Impedance: 50 ohm ±2ohm Input Capacitance: 60 pF typical Amperage Rating: 2 amperes Overall Length: 24" 2 in stock . Call for price
	HP 10248B / Agilent 10248B Eight Bit Probe Kit for 16xx Logic Analyzers Call for price - Please advise which set Please visit: www.torontosurplus.com for further details. We have 4 sets in stock POD 1: 50 kOhm, 14 pF, Max Input: +15 V Peak POD 2: 50 kOhm, 14 pF, Max Input: +15 V Peak POD 3: 50 kOhm, 14 pF, Max Input: +15 V Peak Clock Call for price - Please advise which set
	HP 10440A / Agilent 10440A Miniature Passive Probe, 100:1, 2m for 16532A, 1660 Series and maybe more Call for price Please visit: www.torontosurplus.com for further details. The Agilent 10400 miniature probe family offers modular construction, superior electrical performance, and high reliability. The narrow sharp probe tip is excellent for probing surface mount technology. 10 Mohm//2pf For 1Mohm//6-14pF Inputs Call for price
	HP 10525T / Agilent 10525T Logic Probe with BNC connector $ 25.00 US Please visit: www.torontosurplus.com for further details. The 10525T Logic Probe provides TTL/DTL trouble-shooting at low cost. Ideally suited to 5 V logic applications Input impedance: <25 kohms in both high and low state Overload protection 50 MHz data rate capability Logic States: 2.0 V +0.4, -0.2 (High); 0.8 V +0.2, -0.4 (Low) Minimum input pulse width: 10 nS Probe only in plastic case. 1 in stock $ 25.00 US
(Photo shy)	HP 10526T / Agilent 10526T Logic Pulser with BNC Connector Call for price Please visit: www.torontosurplus.com for further details. The 10526T Logic Pulser provides dependable single-shot operation in TTL/DTL applications. Just press the pulse button and the pulser delivers a single powerful pulse of the correct pulse width, polarity and amplitude. Output Pulse Voltage: >2 V @ 0.65 A (high pulse), <0.8 V @ 0.65 A (low pulse) Pulse Width: 0.3 µS nominal Output Impedance: <2 ohm (active state), >1 Mohm (off state) Looks like 10525T above. Call for price
	HP 11042A / Agilent 11042A Probe-T-Connector, 50 ohm Line for 410 Series & maybe 455 Voltmeters $ 45.00 US Please visit: www.torontosurplus.com for further details. Probe Coaxial T-Connector for 410 series voltmeters. Measures voltages between enter conductor and sheath of 50 ohm transmission line. Maximum SWR, 1.1 at 500 MHz, 1.2 at 1 GHz. Male and female type N fittings. $ 45.00 US
	HP 11096A / Agilent 11096A High Frequency Probe Call for price Please visit: www.torontosurplus.com for further details. VRMS: 30 VRMS max. Volts: 200 VDC max. Input Impedance: 4 M ohm; 2 + 0.5 pF Accuracy (loaded with 10 M ohm +10% Last Calibrated 01/14/2003. Call for price
(Photo shy)	HP 1122A / Agilent 1122A Probe Power Supply Please visit: www.torontosurplus.com for further details. Available, photo and details to follow.
(Photo shy)	HP 11664E / Agilent 11664E Scalar Detector 10 MHz - 26.5 GHz with Manual & SMA (f) - N (m) Adapter for 8757 8756 8755 $ 575.00 US Please visit: www.torontosurplus.com for further details. Designed for use with the 8757, 8756, or 8755 Analyzers (in AC detection mode only) Frequency Range: .01-26.5 GHz Max Input: 20 dBm / 10 VDC Dynamic Range: +60 to -60 dBm Connector: 3.5 mm $ 575.00 US
	HP 15550C / Agilent 15550C Opt. 4 Accessory Kit for HP 3700 Series IF Analyzers $ 99.00 US Please visit: www.torontosurplus.com for further details. This Kit Includes: 1 x 15520C - 6 dB IF Hybrid 2 x 75 ohm Terminations 1 x 17 dB Termination Asst cables with WECO477, BNC Connectors and more $ 99.00 US
	HP 1816A / Agilent 1816A Sampling Head - DC 4 GHz, TR<90pSEC $ 85.00 US Please visit: www.torontosurplus.com for further details. Without tunnel diode mount. $ 85.00 US
	HP 2830A / Agilent 2830A Sensor Oscillator for 2850A Probe / 2801A Quartz Thermometer Call for price Please visit: www.torontosurplus.com for further details. Call for price
	HP 2850A / Agilent 2850A Sensors / Temperature Probe for HP 2801A Quartz Thermometer $ 150.00 US each Please Specify Please visit: www.torontosurplus.com for further details. SPECIFICATIONS: Range: -80 to 250°C Slope: ~1 kHz/°C Cable length: 3 m CONFIGURATIONS AVAILABLE: A) Sensor with Wand (1 in stock) B) Sensor without Wand (4 in stock) $ 150.00 US each Please Specify
	HP 349A / Agilent 349A Noise Source 400 MHz - 4.0 GHz Call for price Please visit: www.torontosurplus.com for further details. 349A UHF Noise Source: Argon gas discharge tubes in Type N coaxial configuration for automatic noise figure readings 400 to 4000 MHz. SPECIFICATIONS: Frequency Range: 400 to 4000 MHz , wider with correction Excess Noise Ratio (ENR equation upon request):15.6 dB ±0.6 dB, 400-1000 MHz; 15.7 dB ±0.5 dB, 1.0 -4.0 GHz SWR: <1.35 (fired). <1.5 (unfired) up to 2.6 GHz; <1.5 (fired or unfired), 2.6 GHz - 3.0 GHz; <2.0 Fired, <3.0 (unfired) 3.0 GHz - 4 GHz Connectors: Type N Noise source only Call for price
	HP 420A / Agilent 420A Crystal Detector 0.01 to 12.4 GHz, BNC female/Type N male Call for price Please visit: www.torontosurplus.com for further details. SPECIFICATIONS: Frequency range: 0.01 to 12.4 GHz Frequency response: ±3.5dB Max SWR: 3.0 Additional specifications available upon request. 1 in stock. Call for price
	HP 423B / Agilent 423B Crystal Detector 0.01 to 12.4 GHz, BNC female/Type N male $ 249.00 US Please visit: www.torontosurplus.com for further details. SPECIFICATIONS: Frequency range: 0.01 to 12.4 GHz Frequency response Octave band flatness (over any octave 0 01 to 8 GHz): ±0.2dB Broadband flatness: 0.01 dB to 12.4 GHz: ±0.3dB SWR, maximum (50ohm) characteristic impedance): 0.01 to 4 GHz: 1.15 / 4 to 12.4 G Hz: 1.30 Maximum operating input (Peak or Avg): 200 mW Additional specifications available upon request. 3 in stock. $ 249.00 US
(Photo shy)	HP 456A / Agilent 456A AC Current Probe for Voltmeters $ 95.00 US Please visit: www.torontosurplus.com for further details. FEATURES/SPECIFICATIONS: 1 mA to 1 mV conversion permits direct reading up to one ampere RMS Sensitivity: 1 mV/mA + 1% at 1 kHz Frequency Response: + 2%, 100 Hz to 3 MHz; + 5%, 60 Hz to 4 MHz; -3 dB at <25 Hz and > 20 MHz. Max Input: 1 A RMS, 1.5 A p; 100 mA above 5 MHz The unit we have has 2 x BNC Input and Outuput connectors on front, for you to connect your own probes (not incl.) $ 95.00 US
	HP 5011T / Agilent 5011T TTL Accessory Kit Call for price Please visit: www.torontosurplus.com for further details. 10525-60015 Pulse Memory with Manual 10526-60002 Multi-pin Stimulus Kit for Logic Pulser 10525-60012 Tip Kit for 10525T probe & 10526T Pulser (4/6 pcs) 10529-60014 Board with DIPs (not shown) Call for price
	HP 5015T / Agilent 5015T Logic Troubleshooting Kit Call for price Please visit: www.torontosurplus.com for further details. This kit contains: 10525T Logic Probe 10526T Logic Pulser 10528A Logic Clip 2 Manuals Call for price
	HP 5356C / Agilent 5356C OPT 001 40 GHz Frequency Converter for use with 5355A on our Counters Page Call for price, specify unit Please visit: www.torontosurplus.com for further details. Sensitivity -25 dBm Measurement Resolution 100 Hz Pulse Width 75 ns (min) OPT 001 = 26.5-40 GHz Waveguide (WR-28) We have 1 each with and without OPT 001 Waveguide Call for price, specify unit
	HP 546A / Agilent 546A Logic Pulser $ 130.00 US Please visit: www.torontosurplus.com for further details. Automatic polarity pulse output, pulse width and amplitude make for easy multi-family operation when you use the 546A logic pulser. But the real surprise comes when you code in one of its six ROM-programmable output patterns. This feature allow you to continually pulse a circuit when necessary or it also probides an easy means to put an exact number of pulses into counters and shift registers. Specifications: Output TTL/DTL: <650 mA > µs CMOS: <100 mA > µs $ 130.00 US
	HP 548A / Agilent 548A Logic Clip $ 95.00 US Please visit: www.torontosurplus.com for further details. Fully automatic, protected to 30 VDC , and employing bright LEDs in its display, the 548A brings multi-family operation to the HP line of IC Troubleshooters. The Clip can be externally powered, if desired, using a simple power connector (not incl). Specifications: Input Threshold: (>0.4 x Supply Voltage)= Logic High Input Impedance: 1 CMOS load per input Input Protection: 30 VDC for 1 minute Supply Voltage: 4-18 VDC across any two pins $ 95.00 US
(Photo shy)	HP 8481A / Agilent 8481A Power Sensor 10 MHz to 18 GHz, 50 ohm, 100 µW to 100mW max, -10 to +20 dBm, Type N (m) $ 625.00 US Please visit: www.torontosurplus.com for further details. The 8480 series power sensors are designed for use with the 435B, 436A, 437B, 438A, 70100A, E1416A and now the E4418B and E4419B power meters. These thermocouple and diode power sensors rovide extraordinary accuracy, stability, and SWR over a wide range of frequencies (100 kHz to 110 GHz) and power levels -70 dBm to +44 dBm). The unit uses a Type-N (male) connector. $ 625.00 US
(Photo shy)	HP 8481H / Agilent 8481H Power Sensor 10 MHz to 18 GHz, 50 ohm 100 µW to 3.5 W max, -10 to +35 dBm $ 750.00 US Please visit: www.torontosurplus.com for further details. This sensor is for use with the EPM series, EPM-P series, E1416A, 70100A and the 43x power meters. It provides extraordinary accuracy and stability and the sensor gives you extremely low SWR. See above for cables. $ 750.00 US
	HP 8482A / Agilent 8482A Power Sensor 100 kHz to 4.2 GHz, 50 ohm, .3 µW - 100 mW $ 650.00 US Please visit: www.torontosurplus.com for further details. The 8480 Series of power sensors have been designe dofr use with the 435B and 436A power meters as well as the more recent EPM series, EPM-P series, 70100A and E1416A. They feature wide frequency and power ranges in addition to very low SWR. See above for cables. $ 650.00 US
(Photo shy)	HP 8482H / Agilent 8482H Power Sensor 100 kHz to 4.2 GHz, 50 ohm, 100 µW - 3 W, –10 dBm to +35 dBm $ 650.00 US Please visit: www.torontosurplus.com for further details. This sensor is for use with the EPM series, EPM-P series, E1416A, 70100A and the 43x power meters. It provides extraordinary accuracy and stability and the sensor gives you extremely low SWR. See above for cables. $ 650.00 US
	HP 8483A / Agilent 8483A Power Sensor 100 kHz to 2 GHz, 75 ohm, .3 µW - 100 mW $ 725.00 US Please visit: www.torontosurplus.com for further details. The Agilent 8483A thermocouple power sensor is designed for use with the EPM series, EPM-P series, 70100A, E1416A and the discontinued 43x power meters. It provides extraordinary accuracy and stability. The 8483A power sensor gives you extremely low SWR / Excellent SWR above 600 kHz for reducing mismatch uncertainty. This sensor is the only 75 ohm impedance sensor in the 8480 series & has a Precision type-N connector. $ 725.00 US
(Photo shy)	HP 8484A / Agilent 8484A Power Sensor with 11708A 10 to 18 GHz, 50 ohm, .01 nW - 10 µW , +10-+20- dBm Call for price Please visit: www.torontosurplus.com for further details. This sensor is designed for use with the HP 435B, 436A, 437B and 438A Power Meters. Call for price
	HP 85027A / Agilent 85027A Directional Bridge 10 MHz - 18 GHz for 8755 8756 8757 Analyzer Call for price Please visit: www.torontosurplus.com for further details. The Agilent 85027A directional bridge is designed to operate with either the Agilent 8757 in ac or dc detection modes or with the Agilent 8756 or 8755 in ac detection mode. This bridge offers high directivity, excellent test port match, and a measurement range of up to 18 GHz in coax. Can detect both ac and dc signals depending on scalar network analyzer used High directivity Excellent test port match Measurement range up to 18 GHz in coax Designed for use with the 8755 / 8756 / 8757 Analyzers Frequency Range: 10 MHz -18 GHz Max Input: 23 dBm / 10 VDC Range: AC +16 to -55 dBm / DC +16 to -50 dBm Connector: Type N (m), APC-7 (7mm) Included with the Bridge are the following: Wooden case with foam insert Adapter, Type N (m-m) 85021-60001 APC-7 Scalar Open Short Manual Call for price
(Photo shy)	HP AC-21C 50X/ Agilent AC-21C 50X Oscilloscope Probe Call for price Please visit: www.torontosurplus.com for further details. AC-21C 50X, 9Mohm, 1000V Max 1 in stock Call for price
	HP P424A / Agilent P424A Crystal Detector 12.4-18.0 GHz , BNC female/WR62 $ 99.00 US Please visit: www.torontosurplus.com for further details. $ 99.00 US

IFI EFS-1 E-Field Sensor with LMT Light Modulator / Transmitter, Antennas & Cable
$ 800.00 US Please visit: www.torontosurplus.com for further details.
FEATURES: E-Field Range: 0 - 300 V/m
Frequency Range: 10 kHz-200 MHz

FULL SCALE RANGE:
Switch Up: Long Antenna - 10 V/m, Medium - 100 V/m, Short - 300 V/m
Switch Down: Long Antenna 3 - V/m, Medium 30 - V/m, Short - n/a

Comes With:
1 set of 3 antennas (3 different lengths)
The cable that connects the EFS-1 to the LMT

They made these units in duo-tone green & brown/beige so please feel free to specify your color.
$ 800.00 US

IFI LDI Remote Monitor Volts/Meter for EFS-1 E-Field Sensor with LMT Light Modulator / Transmitter
$ 200.00 US Please visit: www.torontosurplus.com for further details.
We do not have the fiber optic cable that connects the LMT to the LDI.
$ 200.00 US

Kings KC-99-118-M06 similar to Tektronix 013-0277-00 Adapter BNC male to 5mm Miniature Probe Tip
$ 75.00 US Please visit: www.torontosurplus.com for further details.
This is for a 5 mm probe, but there was a little bit of play when I checked it with a Tektronix mini probe.
$ 75.00 US

	M/A-Com Adapter Kit & Ultra Low Loss Cables for Network Analyzers $ 1995.00 US Please visit: www.torontosurplus.com for further details. What a beauty this set is !!! It comes with 12 Connectors & 2 wrenches all stored in a hinged hardwood box & 3 cables. 2 cables are 24" 1999-0024 - P1 J18 M400/P1 W13 - P2 J53 MSC/J41 MSC & 1 cable 72" 1999-0072 - W14 OF RFS 8 04660 - ASSY 4 245 49-059 $ 1995.00 US
	Mark Products / National Research Geophone - LP02480485 SC0833 MFG 03-89 $ 60.00 US Please visit: www.torontosurplus.com for further details. It contains an L15B Cylinder, Resonance Frequency: 4.5 Hz, Date Code: 0289 The black cord used is Seiscord $ 60.00 US
	Mayr 0800569 Endschalter $ 85.00 US Please visit: www.torontosurplus.com for further details. $ 85.00 US

	Narda 8010 Low Noise Probe Amplifier, 3 Ch for use with Call for price Please visit: www.torontosurplus.com for further details. Call for price
	Noise Sources: Eaton 7660-002, MSC MC1000 Call for price Please visit: www.torontosurplus.com for further details. Eaton 7660-002 - 2.9 to 3.3 GHz ENR 34.7 +.5 dB MSC Microwave Semiconductor MC1000 Call for price

	Pacific Measurements PM 12466 Power Detector Cable, 1 MHz to 18 GHz, +17 dBm, 50 mW Call for price Please visit: www.torontosurplus.com for further details. Detector Connector: APC-7 Cable Connector: DIN-3 type Call for price
	Pacific Measurements PM 12868 Power Detector Cable, Max Input 5V Call for price Please visit: www.torontosurplus.com for further details. Detector Connector: BNC male Cable Connector: DIN-3 type Call for price
(Photo shy)	Philips Oscilloscope Probes PM 8925L Call for prices Please visit: www.torontosurplus.com for further details. FEATURES: 10Mohm, 14Pf, 3.5ns, 500V Max Call for prices
	Philips PM 8295 L / PM8295L Oscilloscope Probe Call for price Please visit: www.torontosurplus.com for further details. 10 Mohm // 14 pF 3.5 ns 10:1 500 V max BNC (m) Connector Call for price
	Pyramid Amprobe 600 Clamp-on Type Ammeter with Probes & Leather Case $ 75.00 US Please visit: www.torontosurplus.com for further details. 0-600 VAC switchable over 3 ranges 150, 300 600 0-600 Amp switchable over 6 ranges 15, 30, 60, 150, 300, 600 $ 75.00 US

	Rohde & Schwarz 395.2680.02 RF Probe 0.02 to 1000MHz Call for price Please visit: www.torontosurplus.com for further details. 0.02 to 1000MHz - ^U AC < .15 V C ~ 2.5 pF - ^U DC < 400 V Call for price
	Rohde & Schwarz ESH2-Z2 Probe Call for price Please visit: www.torontosurplus.com for further details. This Probe is used for measuring AC voltages on lines that do not carry AC supply voltage. Frequency Range: 9 kHz to 30 MHz Measurement range (average indication, IF bandwidth 200Hz): -20 to 120 dBµV Attenuation/error: 10 dB /< 1 dB Input Impendance: 118 kOhms +5% \|\| 8 pF Max. input voltage: f< 63Hz: 100 V f<500Hz: 5 V 9 kHz to 30 MHz: 3 V Call for price
	Rohde & Schwarz ESH2-Z3 Probe, 9 kHz - 30 MHz Call for price Please visit: www.torontosurplus.com for further details. The passive probe ESH2-Z3 is suitable for measuring RFI voltages (on AC supply lines to VDE 0876). Frequency Range: 9 kHz to 30 MHz Measurement range (average indication, IF bandwidth 200Hz): +10 to +150 dBµV Attenuation/error: 30 dB /< -1 to +5 dB Input Impendance: 1.5 kOhms +2% \|\| 9 pF Max. input voltage: f< 63Hz: 250 V f<500Hz: 250 V 9 kHz to 30 MHz: 30 V Call for price
	RS Components HEME 100 Clamp Meter / 611-414 Clampmeter Call for price Please visit: www.torontosurplus.com for further details. Call for price

	SDT SDT101 Ultrasonic Leak Detector $ 1500.00 US Please visit: www.torontosurplus.com for further details. Comes with: Detector, Headphones, AC Adaptor, Battery & Cone $ 1500.00 US
	Simpson 0010 Thermistor Lead, 15' for 385-3L & 389-3L Temperature Testers $ 30.00 US Please visit: www.torontosurplus.com for further details. In original packaging, never used!! $ 30.00 US
	Simpson 00509 DC High Voltage Test Probe 30,000 VDC (20,000 ohms per V) - BRAND NEW Call for price Please visit: www.torontosurplus.com for further details. This probe body is made of high temperature polystyrene, and contains a high voltage precision resistor of high megohm value. The shield of the test cable and the internal probe shield are connected to the ground return lead by a flexible copper braid between the two elbow connectors. A 48 inch ground return lead terminated with an insulated alligator clip complete the test lead set. No additional leads are required. For use with any 20,000 ohms per volt multimeter having a 2.5 VDC range Accuracy, Probe Resistance: ±2% Comes with Operating Instruction Sheet. Call for price

(Photo shy)	Tektronix 010-0361-00 10x Attenuator for P6046 Probe - Used $ 100.00 US Please visit: www.torontosurplus.com for further details. Looks the same as 010-0419-00 below $ 100.00 US
	Tektronix 010-0419-00 10x Attenuator for P6046 Probe - NEW $ 125.00 US Please visit: www.torontosurplus.com for further details. $ 125.00 US
	Tektronix 015-0282-00 SG504 Leveling Head / Output Head $ 1495.00 US Please visit: www.torontosurplus.com for further details. BNC m connector on Head BNC m & 2 pin LEMO connectors on cables. $ 1495.00 US
	Tektronix 015-0310-01 Comparator Head & Tektronix 015-0309-01 Remote Variable for CG551AP CG5001, CG5011 & CG5010 $ 975.00 US / Set Please visit: www.torontosurplus.com for further details. These two accessories are used with the Tektronix CG551AP CG5001, CG5010 & CG5011 Programmable Calibration Generators 015-0309-01 Remote Variable: Permits remote operation of the following panel controls: Unit/Div, Variable-Fixed Button, Continue Pushbutton and the VAR. 015-0310-01 Comparator Head: Used to calibrate built-in oscilloscope calibrators against the signals available from the CG. Both the oscilloscope calibrator and CG standard amplitude signals are applied to the Comparator Head and simultaneously displayed on the oscilloscope CRT. The CG signals are then varied to obtain congruent displays. Errors are then displayed on the CG readout. The connector photo is shown beside the corresponding unit. Not shown - the comparator body has 2 x BNC connectors 1 each m & f. We are selling these as a set - The one we currently have in stock is not the one pictures, and has signs of use. Photos available upon request. $ 975.00 US / Set
	Tektronix 017-0076-00 Adapter GR874 to 5mm Miniature Probe Tip Call for price Please visit: www.torontosurplus.com for further details. GR874 Adapter for All Tektronix 5mm Oscilloscope Probes Call for price
	Tektronix 017-0094-00 GR874 to Probe Tip 50 Ohm, 1 W Termination Adapter for P6201 Probe Call for price Please visit: www.torontosurplus.com for further details. Call for price
	Tektronix 131 Current Probe Amplifier $ 85.00 US (Preamp Only) Please visit: www.torontosurplus.com for further details. This amp is for the P6016 Probe. $ 85.00 US (Preamp Only)
(Photo shy)	Tektronix 2245A 100MHz Oscilloscope, 4 Ch., Dual Timebase Call for price Please visit: www.torontosurplus.com for further details. Call for price
	Tektronix ADA400A Differential Preamplifier $ 895.00 US Please visit: www.torontosurplus.com for further details. The ADA400A Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit. FEATURES & BENEFITS: Active Differential Preamplifier 10 µV/div Sensitivity Typically 100 dB CMRR DC to 10 kHz Integral Probe Power with TEKPROBE™ BNC APPLICATIONS: Mechanical Analysis Audio Design Biomedical Research (Not Certified For Patient Connection) Medical Equipment (Not Certified For Patient Connection) The ADA400A is powered directly from TDS400, TDS500, TDS600, TDS700, TDS5000, TDS7000 (TEKPROBE), TDS7000 (TekConnect) w/TCA-1Meg Series oscilloscopes. It may also be powered by a 1103 Probe Power Supply. Compatible with the P6101 Probe. Compete specifications available upon request. 3 in stock $ 895.00 US
	Tektronix AM503 Current Probe Amplifier with A6302 Probe Excellent, NOS Condition Call for price Please visit: www.torontosurplus.com for further details. The AM503 Current Probe Amplifier requires a TM501 or TM503 Power Module and is calibrated in 12 steps. Bandwidth can be limited to 5 MHz to eliminate unwanted transients and a front panel light warns of input currents above 20 Adc with the A6302 probe. The A6302 Current Probe can make AC or DC coupled current measurements as well as differential or sum measurements. We have 1 only NOS with the A6302 probe. The rest of our AM503's are sold without the probe. TM Series Power Modules Sold Separately. Call for price
	Tektronix AM503B Programmable Current Probe Amplifier with A6302 Probe and 502A Mainframe Call for price Please visit: www.torontosurplus.com for further details. FEATURES: Manual Current Probe Amplifier Push Button Auto Balance/Degauss Bright LED Current/Division Display Eliminates Need to Calibrate Amplifier with Specific Probes Plugs into TM 500/5000 Power Modules AC/DC Measurements A6302 Probe: - DC to 50 MHz - 20 A Continuous/50 A Peak - Max. Conductor Diameter: 0.15 in. Call for price
	Tektronix CT-5 high Current Transformer for A6302 or P6021 Probes $ 325.00 US Please visit: www.torontosurplus.com for further details. Tektronix CT-5 high current range extender for current probe. The CT-5 High Current Transformer is designed to extend the current measuring capability of either the Tektronix A6302 current probe (used with the AM503 current probe amplifier) or the Tektronix P6021 current probe (use with the type 134 current probe amplifier). With either probe, the CT-5 extends the measurement range by a factor of up to 1000X. The CT-5 includes a pistol grip type handle with receptacles to accept the P6021 or A6302 in either of two positions, providing a choice of two current ranges. A sliding jaw on the transformer permits insertion of the current carrying conductor without breaking the circuit under test. The core and shield assembly is insulated from the windings and the handle allowing measurements on bare conductors with potentials to 3000volts. The accessory high-voltage insulation may be used to extend the allowable voltage to 14kV peak. The DC Bucking Coil and interconnection assembly nullifies the saturating effects of dc currents to 300amperes without appreciably degrading the transformer characteristics. FEATURES: Max continuous AC current:1000A peak from 20Hz to 1.2Khz @ 25degC ambient Max pulse current: 50,000A peak & Max voltage isolation: 14kV peak Comes complete as shown with: CT-5 High Current Transformer, High Voltage Insulation Carry Case, Instruction Manual & DC Bucking Coil. $ 325.00 US
(Photo shy)	Tektronix Oscilloscope Probes (6000's); P6006, P6009, P6012 P6028, P6054, P6056, P6062A , P6063B Call for prices Please visit: www.torontosurplus.com for further details. The following units are available P6006 10X, 8.5pF, 10Mohm, 6ft P6009 100X, 2.5pF, 10Mohm, 9ft P6012 10X, 17pF, 10Mohm, 9ft P6028 1X, 47pF, 6ft P6054 10X, 12.5pF, 6ft P6056 10X, 500ohm, 0.5W P6062A (1X)-1Mohm, 105pF; (10X)-10Mohm, 14pF, 6ft P6063B (1X)-1Mohm, 105pF; (10X)-10Mohm, 14pF, 6ft Call for prices
(Photo shy)	Tektronix Oscilloscope Probes (6100's); P6101, P6104, P6106, P6105, P6109, P6120, P6131 Call for prices Please visit: www.torontosurplus.com for further details. The following units are available P6101 1X, 3ft or 6ft P6104 10X, 100Mhz, 10.5pF, 10Mohm, 3ft P6106 10X, 13pF, 10Mohm, 6ft P6105 10X, 100Mhz, 13pF, 10Mohm, 6ft P6105A 10X, 200Mhz, 11.2pF, 10Mohm, 6ft P6109 10X, 150Mhz, 13.2pF, 10Mohm, 6ft P6120 10X, 14pF, 10Mohm, 4ft P6131 10X, 150Mhz, 10pF, 10Mohm, 4ft Call for prices
	Tektronix P6015 High Voltage Probe Kit (BNC) $ 400.00 US Please visit: www.torontosurplus.com for further details. P 6015 (010-131) 40 kV Peak Pulse, 3 pF 100 Mohms DC. (010-049) Compensating Box High Voltage Probe. Probe tip. With instruction booklet all contained neatly in the box. $ 400.00 US
(Photo shy)	Tektronix P6022 Probe with Termination - Like New $450.00 US Please visit: www.torontosurplus.com for further details. $450.00 US
	Tektronix P6032 Cathode Follower CF Probe including 6 tips from 10x to 500x $ 295.00 US Please visit: www.torontosurplus.com for further details. High frequency cathode-follower probe designed for use with Tek vertical sampling plug-in units such as 3S76, 4S1, 4S2A or 1S1. Risetime: 0.4 ns (typical) for probe and attenuator lead Max Output: +150 mV into a 50 ohm lead Signal Delay: 10 ns approx. $ 295.00 US
	Tektronix P6053B / 010-6053-13 Oscilloscope Probe Kit 10X Call for price Please visit: www.torontosurplus.com for further details. Miniature fast-rise 10X probe designed for Tek instruments having a nominal input capacitance of 15 to 24 pF. The probe has a pushbutton for actuating the trace-identify function of the o'scope mainframe and readout capability. SPECIFICATIONS: Attenuation: 10X Input R: 10 MHz Input C: 12.5pF Compensation: 15pF min to 24pF max Bandwidth 200 MHz Voltage: 500 VDC max / 500 VAC max Connector: BNC This Kit is brand new with all of the original accessories including the manual!! Call for price
	Tektronix P6058 010-0259-00 Voltage Temperature Probe for 7D12/M1 Module and maybe others Call for price Please visit: www.torontosurplus.com for further details. Call for price
	Tektronix P6150 Probe Kit, DC to 9 GHz for 50 ohm Oscilloscopes Call for price - Specify Kit Please visit: www.torontosurplus.com for further details. The P6150 is a 9 GHz bandwidth, 10X attenuation, low impedance probe designed for use with the SD2X family of Sampling/TDR plug-ins. The probe consists of interchangeable, screw-in attenuator tip assemblies (1X and 10X) and an SMA-to-SMA probe cable. An assortment of circuit and grounding attachments is included to optimize attachment to the device under test while maintaining high signal integrity. FEATURES: 50 ohm Divider (Zo) Low Capacitance Low Capacitive Loading to Extremely High Frequencies Interchangeable Attenuator Tip Assemblies: 1X, 10X (P6150) SPECIFICATIONS: Nominal Length - 1 m. Attenuation - 10X: ±2%, 1X: ±2%. Bandwidth - 9 GHz, >3 GHz Rise Time - <38.8 ps, <170 ps. We have 2 kits in stock: 1) Complete with ~10X, 9 GHz, 1.0 m, Low Impedance Probe ~ One 1X Attenuator Head (206-0398-00) ~ One 10X Attenuator Head (206-0399-03) ~ 1.0 m Cable Assembly (174-1341-00) ~ Instruction Sheet (070-7173-01) ~ One Accessory Kit consisting of: Ground Clips, Adjustable Ground Leads, Electrical Contacts and Probe to Circuit Board Ground Connector (020-1708-00). 2) Complete with ~ 10X, 9 GHz, 1.0 m, Low Impedance Probe ~ Two 1X Attenuator Head (206-0398-00) ~ 1.0 m Cable Assembly (174-1341-00) ~ Instruction Sheet (070-7173-01) ~ and 1 Accessory Kit consisting of: Ground Clips, Adjustable Ground Leads, Electrical Contacts and Probe to Circuit Board Ground Connector (020-1708-00). Specifications available upon request. Call for price - Specify Kit
	Tektronix P6201 Active FET Probe DC-900 MHz with AC-DC Coupling Swich $ 495.00 US Please visit: www.torontosurplus.com for further details. The P6201 is an active (FET) prove providing unity gain and dc to 900 MHz bandwidth. The P6201 was the best general purpose probe within its voltage range from the standpoint of electrical performance. Very low input capacitance permits acquisition of high frequency signals within minimum loading of circuits under test while high input resistance minimizes low frequency and DC loading. Plug on attenuator heads provide higher input resistance and reduced input capacitance. Rise Time: <0.4 ns Bandwidth (verified by rise time): >900 MHz Attenuation: x1 Input Resistance: 100 kOhms Input Capacitance: 3 pF Input R with Attenuator: 1 MOhm Input C with Attenuator: 1.5 pF Dynamic Range: ±0.6 V DC Offset Range: ± 5.6 V Maximum Input Probe only: ± 100V peak Derated Above 60 MHz Includes Probe, 010-0376-00 10x Attenuator Head, 010-0377-00 100x Attenuator Head, 013-0135-00 Retractable Probe Tip (seizer tip), a couple of insulating sleeves/ground contact and a spring. $ 495.00 US
	Tektronix P6430 / 010-6430-00 Temperature Probe, -55C TO +150C with 1.5 M Cord and Mini 2 pin Plug $ 125.00 US Please visit: www.torontosurplus.com for further details. Works with DM 44, DM 502 and others $ 125.00 US
	Tektronix P6501 Opt 1 Fixture Mountable Active Microprobe $ 499.00 US - MINT CONDITION IN BOX !!! Please visit: www.torontosurplus.com for further details. The P6501 Microprobe is a small, 1 Mohm input active probe optimized for probe card mounting and use with probing stations. FEATURES Bandwidth: DC to 750 MHz Rise Time: 450 ps Attenuation: 10X Input Resistance: 1 Mohm Capacitive Loading: <1.9 pF Dynamic Range: +10 V. THIS SET COMES COMPLETE WITH 1 x P6501 1 Mohm Active Microprobe, 2 x Tungsten Probe Tips, 1x Ground Lead, 1 x 110VAC Power Supply, 1 x 1.5 m 50 ohm Cable Miniature to BNC, 1x Continuous Random Noise Measurement Low Pass Filter Fc = 4.2 MHz & 1x Continuous Random Noise Measurement Weighting Network Fc = 4.2 MHz. $ 499.00 US - MINT CONDITION IN BOX !!!
	Tektronix P6601 / 010-6601-01 Temperature Probe, -62^°C to + 140^°C Call for price Please visit: www.torontosurplus.com for further details. Platinum-film temperature sensing probe with 1 pin LEMO connector for DM501 & DM502A Call for price
	Tektronix RC Normalizer 011-066 RC = 1 Mohm x 20 pF with BNC Connectors $ 90.00 US Please visit: www.torontosurplus.com for further details. $ 90.00 US
	Tektronix RC Normalizer 067-0537-00 RC = 1 Mohm x 15 pF with BNC Connectors $ 90.00 US Please visit: www.torontosurplus.com for further details. $ 90.00 US
	Tektronix RC Normalizer 067-0539-00 / 011-067 RC = 1 Mohm x 24 pF with BNC Connectors $ 90.00 US Please visit: www.torontosurplus.com for further details. $ 90.00 US
	Tektronix RC Normalizer 067-0541-00 / 011-068 RC = 1 Mohm x 47 pF with BNC Connectors $ 90.00 US Please visit: www.torontosurplus.com for further details. $ 90.00 US
	Tektronix RC Normalizer 067-0755 RC = 1 Mohm x 22 pF with BNC Connectors $ 90.00 US Please visit: www.torontosurplus.com for further details. $ 90.00 US
	Tektronix S-4 Sampling Head for 7000/5000 Series $ 495.00 US Please visit: www.torontosurplus.com for further details. The S4 Sampling Head has a 25 ps risetime, DC to 14GHz, 50 ohm input impedance Variable DC Offset allows signals between +1 V and -1 V limits to be displayed at 2 mV/div Displayed noise is >/= 5 mV unsmoothed, 2.5 mV smoothed (includes 90% dots) $ 495.00 US
(Photo shy)	Tektronix SD20 SD 20 Sampling Head for CSA803 and 11801C Sampling Oscilloscopes $ 900.00 US Please visit: www.torontosurplus.com for further details. The SD20 is a 20 GHz, single channel, loop through sampling head. Rise Time: 17.5 ps Impedance: 50 Ohm Noise: 750 µV typical with unity dot response Application: microwave systems research and development, digital device characterization and high-speed digital communications circuit design. Complete Specs available upon request. $ 900.00 US
	Tektronix SD26 SD 26 Sampling Head for CSA803 and 11801C Sampling Oscilloscopes $ 1495.00 US Please visit: www.torontosurplus.com for further details. The SD26 is a dual-channel, 20 GHz equivalent bandwidth sampling head. Rise Time: 17.5 ps Impedance: 50 Ohm Noise: 750 µV Application: Device Characterization. Complete Specs available upon request. $ 1495.00 US

	Waveline 414 Waveguide, Semi-Tunable Crystal Mount 5.85 to 8.20 GHz $ 39.99 US Please visit: www.torontosurplus.com for further details. This is a semi-tunable crystal and bolometer mount. A precision crystal and bolometer holder is mounted upon a waveguide section which is terminated by a choke type shorting plunger. SPECIFICATIONS: Waveguide Size WR-137, Frequency Range: 5.85 to 8.20 GHz, Equivalent Flange Type: UG-344/U Cover, Output Connector: BNC Jack. $ 39.99 US
	Weston 633 Clamp on Ammeter / Clamp Meter $ 115.00 US Please visit: www.torontosurplus.com for further details. This clamp on ammeter can measure currents up to 500A in an AC line. It has a selector to change scale sensitivity from 10A max through to 500A max. The photo is of a meter we sold. The one that we currently have has a crack in the glass in the glass, but you can still see the scale clearly. $ 115.00 US
	Wiltron 560-7A50 RF Detector 10 MHz to 18 GHz $ 795.00 US Please visit: www.torontosurplus.com for further details. This detector is for absolute power and relative transmission measurements. It uses zero-biased, field-replaceable Schottky diodes provide -60 dBm sensitivity. Frequency Range: 0.01 - 18 GHz Impedance: 50 Ohms Input Connector: GPC-7 Measurement Range: -60 dBm to + 16 dBm Maximum Input Power: +20 dBm $ 795.00 US
	Wiltron 560-7N50 RF Detector 10 MHz to 18.5 GHz, +20 dBm Max, 50 ohm $ 795.00 US Please visit: www.torontosurplus.com for further details. 3 in stock $ 795.00 US