|  | Fluke 27 Analog/Digital Multimeter, Heavy Duty
$ 245.00 US Please visit: www.torontosurplus.com for further details.
The Fluke 27 combines accurate digital and analog measurement capability with extreme ruggedness and durability. They have cases twice as thick as any other DMM we build. They are totally sealed, waterproof to 3 feet (one meter) of water for one hour, tough enough to withstand contaminants, chemicals, accidental drops and severe electrical overloads.
FEATURES:
- Digital Display/Counts 3200
- Analog Bar Graph/Segments 31
- AC & DC Voltage
- Resistance
- Diode Test
- Fast Continuity Beeper
- Auto and Manual Ranging
- Automatic TouchHold®
- Superior EMI Shielding
- Operates from -15ºC to 55ºC (5ºF to 131ºF) and 95% Relative Humidity
- Rugged, O-Ring Sealed Case
- Built-in Tilt-Bail Hanger
- Meets Military Shock, Vibration and Water-Proof Requirements
- Min/Max and Relative Mode
$ 245.00 US
|
| (Photo shy) |
Fluke 36 Clamp Meter AC/DC/True RMS - MINT, New Condition in Original Box (precursor to Fluke 336A & Fluke 336)
$ 195.00 US Please visit: www.torontosurplus.com for further details.
The Fluke Model 36 is a rugged, reliable clamp meter that measures ac and dc current and volts. This
versatile clamp meter offers True-rms sensing and MAX Hold for measuring inrush current or maximum load on a circuit. Tapered jaws and slim profile let you get at cables in tight places. Use it for troubleshooting in industrial, commercial, avionics and marine environments.
SPECIFICATIONS:
- DC Current: Range: 1000A, 200A
- DC Volts: Range: 600V/200V
- AC Current (45-400Hz): Range: 600A/200A
- AC Volts (45-400Hz) Range: 600V/200V
- Ohms Range: 200 Ohms
Comes with Soft Case, Leads & Manual
Complete specifications available upon request.
$ 195.00 US
|
|  | Fluke 41 Power Harmonics Analyzer - Like New
Call for price Please visit: www.torontosurplus.com for further details.
You can use the tester to measure voltage and current inputs at power line and harmonic frequencies. Using these inputs, the tester automatically calculates power and a wide range of other measurements useful in determining hamonic distortion levels and sources. This allows you to monitor power quality before and after an installation, troubleshoot a power distribution system, and printout or download data for additional analysis.
SPECIFICATIONS:
- Minimum Input Levels:5V rms, or 1A rms
- Volt Measurements (True RMS): 0.0V to 600V rms (ac+dc), 0.0V to ±933V peak, Input Impedance, 1 Mohm, balanced
- Amps Measurements (True RMS): 1.00 mV (A) to 1000 mV rms (A) (ac+dc), input Impedance, 1 Mohm || 47 pF
- Watts Measurements (Volt-Amps): range - W (VA) to 600 kW (kVA) avg, 0 W (VA) to 2000 kW (kVA) peak.
- Harmonics Measurement Accuracy (Cursor Data): Volts: Fundamental to 13th Harmonic V ±2% + 2 digits, Phase: ±2 degrees (harmonic > 5%)
- Frequency Measurement Accuracy (Fundamental, 5.0 Hz to 99.9 Hz): 5.0 Hz-99.9 Hz ±0.3 Hz
Comes complete with the following:
1 x Fluke 41 Power Harmonics Analyzer
1 x Fluke 41 Manual & Quick Reference Guide
1 x Flukeview 41 Software for Windows
1 x 80i-500s AC Current Probe with Instructions. The probe’s performance is optimized for accurate reproduction of currents at line frequency and up to the 50th harmonic
2 x Test Leads (1each black & red)
2 x TP-20 Test Probes
2 x AC-20 Test Clips
1 x RS-232 Cable
1 x 9-pin to 25-pin Adapter
1 x Case
Call for price
|
| (Photo shy) |
Fluke 73 Digital Multimeter
Call for price Please visit: www.torontosurplus.com for further details.
The 73 is the same series as the 77, but not quite as accurate or quite as many bells and whistles (no touch hold, continuity beeper and only 10A current range).
Call for price
|
|  | Fluke 77 Digital Multimeter
Please visit: www.torontosurplus.com for further details.
Digital 3 1/2 digit, 3200 Count display, 0.3% basic accuracy, Autoranging selection, 3 current ranges 10 A, 320 mA & 32 mA, Touch-Hold, Continuity beeper & Range Hold.
FEATURES: 3.2 -750 VAC, 320 mV-1000VDC, 320 ohms - 32 Megaohm, 32 mA-10A & , Diode test.
Leads are not included
FLUKE 77 ONLY: $ 75.00 US
FLUKE 77 with RUBBER CASE: $90.00 US
|
|  | Fluke 8000A Digital Multimeter
$ 75.00 US Please visit: www.torontosurplus.com for further details.
$ 75.00 US
|
|  | Fluke 8010A Digital Multimeter
$ 145.00 US Please visit: www.torontosurplus.com for further details.
This unit features a 3.5 digit display with 0.1% basic DC accuracy. It measures AC/DC voltage, AC/DC current & resistance.
$ 145.00 US
|
| (Photo shy) |
Fluke 8020A Digital Multimeter
$ 65.00 US Please visit: www.torontosurplus.com for further details.
Display 3 1/2 digits, All basic DMM functions, Conductance, Diode Test, High-speed audible continuity testing (beeper), Bail with detent position.
FEATURES: 200 mV -750 VAC (average sensing, RMS-indicating), 200 mV-1000VDC, 200 ohms - 20 Mohm, 2 mA-2000 mA & , Diode test.
Professional Precision
Looks similar to Fluke 8022A & 8060A
$ 65.00 US
|
|  | Fluke 8022A Digital Multimeter
$ 95.00 US Please visit: www.torontosurplus.com for further details.
Display 3 1/2 digits, All basic DMM functions, Diode Test, High-speed audible continuity testing (beeper), Bail with detent position.
FEATURES: 200 mV -750 VAC (average sensing, RMS-indicating), 200 mV-1000VDC, 200 ohms - 20 Mohm, 2 mA-2000 mA & , Diode test.
General Purpose.
$ 95.00 US
|
|  | Fluke 8050A Digital Multimeter
$ 175.00 US or $90.00 US as is Please visit: www.torontosurplus.com for further details.
Fluke's versatile 4 1/2 digit DDM. It offers 0.03% basic DC accuracy, readout with 16 selectable reference impedances, diode test relative reference/offset, and touch-hold probe compatibility. Various functions include DC volts, DC amps, true-RMS AC volts, true-RMS AC amps, ohms, and dBm (with selectable reference impedances) conductance.
$ 175.00 US or $90.00 US as is
|
|  | Fluke 8060A True RMS Digital Multimeter
$ 275.00 US Please visit: www.torontosurplus.com for further details.
FEATURES:
True RMS AC, Useable to 100 kHz
Frequency Measurements to 200 kHz
Basic DC Accuracy +0.04%
4 1/2 Digit Display
Relative Reference Displays
Conductance and Audible-Visual Continuity Functions.
$ 275.00 US
|
| (Photo shy) |
Fluke 80i-1010 / i1010 DC/AC Clamp-on Current Probe - LIKE NEW
$ 175.00 US Please visit: www.torontosurplus.com for further details.
The 80I-1010 is a battery powered clamp-on current probe that is used with a voltmeter to measure dc currents up to 1000 amps or ac to 700 amps. The jaws will accommodate a single 750 MCM THHN or two 500 MCM THHN conductors. A convenient thumbwheel ZERO control improves accuracy of dc currents down to 1 amp. Typical frequency response is -3 dB at 6kHz.
SPECIFICATIONS:
-
Current Range: DC - 1A to 1000A / AC - 1A to 700A
-
Basic Accuracy 2% + 1 A to 5% depending on Frequency and Amperage
-
Output Signal: 1mV/A AC or DC
-
Frequency Range: 48Hz to 400Hz
-
Working Voltage: 600V AC rms
-
Maximum Conductor Size: 1 ea 30 mm (1.18 inch) or 2 ea 25mm (0.98inch) diameter
$ 175.00 US
|
|  | Fluke 80i-410 / i410 DC/AC Clamp-on Hall Effect Current Probe
$ 115.00 US Please visit: www.torontosurplus.com for further details.
Maximum Conductor Size: one 30 cm (1.18 inch) or two 25mm (0.98inch) diameter
The 80I-410 ac/dc current probe extends the ac or dc apacity to 400 amps. This Hall-effect probe is relatively insensitive to conductor position within the jaws for good repeatabliity. Physical dimensions are identical to the 80i-400 and will accomodate similar conductors. Output signal 1 mV/A. The jaws will accommodate a single 750 MCM THHN or two 500 MCM THHN conductors run in parallel.
SPECIFICATIONS:
-
Specified Current Range: 5A to 400A AC or DC
-
Usable Current Range: 2 A to 600A AC or DC
Accuracy: ±(5% + 2A) DC to 62 Hz
-
Working Voltage: 660V AC rms
-
Maximum Conductor Size: 1 ea 30 mm (1.18 inch) or 2 ea 25mm (0.98inch) diameter
$ 115.00 US
|
|  | Fluke 8506A Thermal RMS Digital Multimeter
$ 899.00 US Please visit: www.torontosurplus.com for further details.
This is a Fluke 8506A Thermal RMS Digital Multimeter. The 8506 uses a thermal rms senseing technique for measureing AC which is far more accurate then calculating through a true rms converter. SPECIFICATIONS:
- 120 ppm 24 hr AC accuracy, 40Hz-20kHz
- full accuracy for crest factors as high as 8:1
- 25 ppm short term AC stability
- frequency response specified to 1 MHz
This 8506A has two bonus options. The 02A option is a Resistance Option to accurately measure resistance after a 2 hr warm up. The 05 option is a IEEE-488 Interface Option to allow full control of all instrument functions and the transfer of ASCII or binary data.
$ 899.00 US
|
|  | Fluke 8600A Digital Multimeter
$ 135.00 US Please visit: www.torontosurplus.com for further details.
The 8600A has 4 1/2 digit resolution featuring high accuracy (±0.02% basic dc accuracy) and full autoranging capability except for current. Measurement functions include ac and dc volts (ranges to 1200V), ac and dc current (ranges to 2 amps) and resistance (to 2 MOhm).
$ 135.00 US
|
|  | Fluke 8840A Digital Multimeter
$ 625.00 US Please visit: www.torontosurplus.com for further details.
Measures AC or DC.
Voltage Range: 200mV to 1000V with a resolution of 1uV.
Current Range: 200mA full scale to 2A full scale.
Resistance Range: 200 Ohms and 20 Mohms full scale.
2-Wire or 4-Wire Resistance Measurements.
Can set the measurement rate between 2, 17 and 100 Measurements/Second.
capable of remote control over a GPIB Bus.
$ 625.00 US
|
|  | Fluke 8860A Digital Multimeter TRMS
$ 350.00 US Please visit: www.torontosurplus.com for further details.
5 1/2 digit precision multimeter with 0.01% basic accuracy. AC voltages may be AC or DC coupled using a front panel control. NUM shift allows direct entry and storage of numerical values in appropriate data registers. FEATURES: 200 mV-1000 VDC, 200 mV-700 VAC TRMS, 20 hZ-300 kHz, 200 ohm-20 Mohm,
$ 350.00 US
|
|  | Fluke 893A AC DC Differential Voltmeter
$ 135.00 US Please visit: www.torontosurplus.com for further details.
With excellent quality at an inexpensive price, this instrument measures both AC and DC with 1µV resolution, accuracy is +/-0.01% DC and +/-0.05% AC, and 50Hz to 10kHz. From 0 to +/-1100V, it directly compares the voltmeter input voltage to the Kelvin-Varley divider output voltage through use of a high input impedance null detector.
$ 135.00 US
|
|  | Fluke 931B RMS Differential Voltmeter
$ 135.00 US - AS IS, Untested Please visit: www.torontosurplus.com for further details.
$ 135.00 US - AS IS, Untested
|
