Product Description
Comes with Laser, Power Supply, Interconnect Cables and Manual. The Laser, Cables & Manual are packed in an Aluminium Transit Case.
Transmitter Interferometer Optical Bed: The optical system contains the neodymium-doped, yttrium-aluminum-garnet (YAG) laser rods, the Pockels cel electro-optical Q-switch and the optical elements required to form the interferometer. Retro prism P1 and P2 in conjunction with the laser oscillator rod, and polarizer from the resonator or oscillator section of the laser.
Transmitter Interferometer Optical Bed: The optical system contains the neodymium-doped, yttrium-aluminum-garnet (YAG) laser rods, the Pockels cel electro-optical Q-switch and the optical elements required to form the interferometer. Retro prism P1 and P2 in conjunction with the laser oscillator rod, and polarizer from the resonator or oscillator section of the laser.
- TRANSMITTER:
- Output Wavelength: 0.5320 µm and 1.064µm nominal
- Output Beam Divergence: 4 mr to 40 mr variable
- Beam Diameter: 0.50 in max
- Energy per Pulse: 40 mJ/pulse minimum
- Pulsewidth: 8 nsec nominal
- Repetition Rate: Single-shot 1 5 and 10 pps
- Input Power Requirements: 24 VDC at 60 A peak 40A avg.
- Sync Pulse Output: 5 V into 50 ohm
- Dimensions & Weight: 9"H x 20"W x 14"D 38 lb
POWER SUPPLY: - Power Requirements: Input 24 VDC
- Dimensions & Weight: 9"H x 14"D x 20"W 36 lb
- Shots/10 counter is 348088
- Rep Rate: Select from SS 1 5 10 or Ext.(BNC)
- BNC Connectors: Flash Lamps Sync (not incl) and Pocket Cell Sync (not incl)
- Switches: FlashLamps - Operate/Standby Pocket Cells - On/Off Control - Local/Remote
- Adjustments: Amplifier - On/Off and adj. knob
- Sockets: 1 x 8 pin 1 x 17 pin + 8 lg pins