Bendix 635BNF RF Load Resistor
200W, 0-3000MHz, 50 Ohm
$ 175.00 US |
Bird 8071Miniload - RF Coaxial Load Resistor / Termination Unit
100W, 50 Ohm, Ambient Air Temp. Range: -40 to +45 C
VSWR: 1.1 max dc to 1000 MHz or 1.2 max 1000 to 2000 MHz
Input Connecter: SMA, Weight: 1.25oz.
Dimensions: 2" W, 1 1/2" H, 1 1/2" D
$ 75.00 US |
Bird 8072 Miniload - RF Coaxial Load Resistor / Termination Unit
300W, 50 Ohm, Ambient Air Temp. Range: -40 to +45 C
VSWR: 1.1 max dc to 1000 MHz or 1.25 max 1000 to 2500 MHz
Input Connecter: SQC, Weight: 12oz.
Dimensions: 2 W, 3 1/2 H, 1 D inches
$ 95.00 US |
Bird 81B Termaline Coaxial Resistor, Oil Dielectric, 80 W, 50 ohm
80 Watt dummy load
Type "N" connector input.
DC to 4GHz
$ 75.00 US |
Boonton 41-4C Power Detector for 42B RF Microwattmeter
FEATURES:
- 200kHz to 1GHz
- 1 nW to 10 mW
- 75 Ohm
- Type N
- 300 mW cw overload
Detector Only.
$ 275.00 US |
Communication Instruments PowerPad 100 Power Divider
All connectors, Input, Measure, Generate are BNC
$ 375.00 |
Electro Impulse DACT-153 Non-Inductive Dummy Load, 15 kW - EXCELLENT Condition, Like New
FEATURES:- Ideal for 10KW AM Transmitter
- Dry, convection cooled
- No line power needed
- 50 ohms resistive
SPECIFICATIONS:
- Frequency: DC-30 MHZ
- VSWR: 1.1:1 Max.
- Power: 15 kW Continuous
- Ambient:-40 to +52°C
- Input: Type 'C' Connector
- Cooling Method: Dry, Convection
- Weight: 90 pounds
- Operating Position: Upright
- Interlock: Thermostat included
Photo courtesy of Electro Impulse.
Call for price |
Fairchild DA-1691GLQ-3 Coaxial Resistor, Oil Dielectric, 2500 W, 50 ohm
Made by Fairchild Camera Inst. Corp, Space & Defense Systems Div.
Dimensions: 6"W x 12"H x 20"D, Type N connector.
The oil will need to be re-filled.
$450.00 US |
General Radio 1607-4630 / 1607-P50 Termination SMA male Threaded, 50 ohm
Call for price |
General Radio 1607-P10 Termination SMA male Threaded, 10 ohm
Looks the same as 1607-P50 above
Call for price |
General Radio 1607-P43 Transistor Mount
Call for price |
General Radio 1607-P44 Transistor Mount
Call for price |
General Radio 1710-P1 Transmission Tee Precision 3 Way Power Divider
Originally meant for the 1710 Network Analyzer.
$ 150.00 US |
General Radio 874-TPD Power Divider
2 in stock
Call for price |
General Radio 874-VQ Voltmeter Detector
2 in stock
Call for price |
General Radio 874-W50BL Termination, 50 ohm
3 in stock
$ 65.00 US |
General Radio 874-WNL Short Circuit Termination
$ 50.00 US |
General Radio 874-WOL Termination
$ 50.00 US |
Guildline 9330 Resistor / Resistance Standard 0.1 W max
Guildline series 9330 standard resistors contain hermetically sealed resistance elements. The resistance wire element is suspended in oil in a hermetically sealed case with a cover plate of low leakage acrylic. All terminals are solid thermal copper to reduce thermal EMF's
FEATURES:
Stability < 3.5 ppm
Nominal Accuracy to 2.5 ppm
4 Terminal Design
Temperature Coefficient < 2 ppm deg. C
We have 1 each:
9330-1, 1 ohm
9330-10, 10 ohm
9330-100, 100 ohm
9330-1k, 1 kohm
9330-10k, 10 kohm
9330-100k, 100 kohm
Specifications available upon request.
$ 850.00 US each
Please specify model when ordering.
|
HP 909A / Agilent 909A Opt. 12 Termination, DC-18 GHz, 50 ohm, 2 W
Opt 12 = Type N male Connector
$ 135.00 US |
HP G486A / Agilent G486A - Temperature Compensated Thermistor Mounts
High efficiency and good RF match, providing high accuracy when used in conjunction with the 432 Power Meter.
$ 145.00 US |
Innowave 1089FS-296 Power Divider
Input: 1 SMA m, Output: 2 SMA f
We think it is an 18 dB, 12.4 GHz Divider.
Call for price |
Narda 25279 Power Divider 2-18 GHz
3 female SMA connectors.
$ 145.00 US |
North Hills Wideband Isolation Transformer - 1kHz - 25MHz, 50 ohm UNB
$ 150.00 US |
Racal MA2961 Radio Interface / Splitter-Amplifier
Single input into 4 amplified outputs.
We believe that the frequency range is 30-76 MHz / VHF Tactical Band, but we're not 100% sure.
Call for price |
SMA Termination - Male, 50 Ohm
We have a few of these new, unused terminations in stock.
$ 19.95 US each |
Sola Basic Dielectric 4100 Resistor, 100 W, 50 ohm
100 Watt dummy load
Type "N" connector input.
DC to 4GHz (we are fairly certain this is the rating)
Call for price |
Tektronix 011-0049-01 Feed Thru / Thru-line Termination 50 ohm, 2 W
50 ohm termination, BNC f to BNC m
4 in stock
$25.00 US |
Tektronix 011-0079-00 Termination for P6020 AC Current Probe
Switchable, 1 mA/mV or 10 mA/mV.
LF 3dB Point
Termination only.
$ 40.00 US |
Tektronix 011-048 Feed Thru / Thru-line Termination 170 ohm, 0.5 W, PL-259 (UHF) Connectors
2 in stock
Call for price |
Tektronix 017-0083-00 Feed Thru / Thru-line Termination, 50 ohms 2 W
50 ohm termination, GR874 to BNC male.
4 in stock
$ 30.00 US |
Tektronix 067-503 Precision DC Divider 10:1 or 100:1, Input 40 V max, Output Load with 1 Mohm
Call for price |
TRM Technical Research Manufacturing A2946 / 2A Divider
Power divider with 1 female SMA connector - In ,
2 female SMA connectors - Out
We think it is a 12.4 GHz Divider.
Call for price |
TRM Technical Research Manufacturing DL126 Power Divider 20-200 MHz
Power divider with 1 female SMA connector - In ,
2 female SMA connectors - Out
$ 20.00 US |
WML Western Microwave CTX-6259 Power Divider, 1 GHz
3 SMA f connectors
Call for price |
WML Western Microwave LCX-6359 Power Divider
2 SMA f connectors
We think it is a 1 GHz Divider.
Call for price |
