| (Photo shy) |
Alfa Aesar 31492 AL-23 Insulating Tube, Both Ends Open (Thin Wall) - BRAND NEW
$ 54.75 / pack Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- OD: 2.7 mm
- # of Bores: 1
- Bore Diameter: 1.7 mm
- Length: 100 mm
- Qty: 8 tubes/pkg
$ 54.75 / pack
|
| (Photo shy) |
Alfa Aesar 31703 AL-23 Tube, Both Ends Open (Thin Walls) - BRAND NEW
$ 37.50 / pack Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- OD: 3 mm
- # of Bores: 1
- Bore Diameter: 2 mm
- Length: 100 mm
- Qty: 5 tubes/pkg
$ 37.50 / pack
|
| (Photo shy) |
Gasket - Kurt J. Lesker O-V012 Viton/Fluorocarbon O-Ring, .364" ID x 0.070" W / 3/8" ID x 1/6" W (nom) - BRAND NEW
$ 5.50 US / pack Please visit: www.torontosurplus.com for further details.
1 pack of 6 in stock
$ 5.50 US / pack
|
|  | Gasket - Kurt J. Lesker ZVIT150, Viton for 6" CF Flange - BRAND NEW
$ 5.90 US / pack Please visit: www.torontosurplus.com for further details.
These Gaskets are for 6" CF Flanges
Inner Diameter: 4.25" / 108mm
Thickness: 3mm (flat profile)
2 Gaskets/Pack, 17Packs in stock
$ 5.90 US / pack
|
| (Photo shy) |
Gasket - Kurt J. Lesker ZVIT19, Viton for 1.33" CF Flange - BRAND NEW
$ 7.80 US / pack Please visit: www.torontosurplus.com for further details.
These Gaskets are for 1.33" CF Flanges
Inner Diameter: 16mm
Thickness: 2mm
2 Gaskets/Pack, 3 packs in stock
$ 7.80 US / pack
|
|  | Gasket - Kurt J. Lesker ZVIT200, Viton for 10" CF Flange - BRAND NEW
$ 35.00 US / pack Please visit: www.torontosurplus.com for further details.
These Gaskets are for 10" CF Flanges
Inner Diameter: 8.22" / 209mm
Thickness: 3mm (flat profile)
2 Gaskets/Pack, 23 packs in stock
$ 35.00 US / pack
|
| (Photo shy) |
Gasket - MDC 191000 Copper for 1.33" CF Flange - BRAND NEW
$ 0.90 US each Please visit: www.torontosurplus.com for further details.
These Gaskets are for 1.33" CF Flanges
approx. 2mm thick
23 in stock
$ 0.90 US each
|
|  | Gasket - MDC 191005 Del-Seal Viton Gasket for 6" CF Flange
$ 2.95 US each Please visit: www.torontosurplus.com for further details.
Inner Diameter: 4 1/4"
7 in stock.
$ 2.95 US each
|
| (Photo shy) |
Gasket - Varian Inc. 9535094 (new number may be FG0600CI) Copper for 6" CF Flange - BRAND NEW
$ 2.25 US each Please visit: www.torontosurplus.com for further details.
These Gaskets are for 6" CF Flanges
approx. 2mm thick
11 in stock
$ 2.25 US each
|
| (Photo shy) |
Gasket - Varian Inc. FG0133VU Viton for 1.33" CF Flange - BRAND NEW
$ 7.80 US / pack Please visit: www.torontosurplus.com for further details.
These Gaskets are for 1.33" CF Flanges
1 pack of 5 in stock
$ 7.80 US / pack
|
| (Photo shy) |
Gasket - Varian Inc. FG0600VU Viton for 6" CF Flange - BRAND NEW
$ 13.00 US each Please visit: www.torontosurplus.com for further details.
These Gaskets are for 6" CF Flanges
3mm thick x 2.5mm W
3 in stock
$ 13.00 US each
|
| (Photo shy) |
Gasket - Varian Inc. FG0800VU Viton for 8" CF Flange - BRAND NEW
$ 14.50 US each Please visit: www.torontosurplus.com for further details.
These Gaskets are for 8" CF Flanges
3mm thick x 2.5mm W
1 in stock
$ 14.50 US each
|
| (Photo shy) |
Gasket - Varian Inc. FG1000VU Viton for 10" CF Flange
$ 17.50 US each Please visit: www.torontosurplus.com for further details.
These Gaskets are for 10" CF Flanges
3mm thick x 2.5mm W
8 in stock
$ 17.50 US each
|
| (Photo shy) |
Kurt J. Lesker QF25-100-SB Blank QF Flange
$ 5.00 US Please visit: www.torontosurplus.com for further details.
1 in stock
$ 5.00 US
|
|  | Kurt J. Lesker AV-068586 QF Four-Way Reducing Cross, Polycarbonate Plastic
$ 15.00 US Please visit: www.torontosurplus.com for further details.
QF40 (2.16" flange/1 1/2" tubing) / QF25 (1.57" flange/1" tubing)
$ 15.00 US
|
| (Photo shy) |
Kurt J. Lesker C6-0800 Six-Way Cross 8" Flange
$ 1500.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:- Nominal Flange: 8"
- Tube O.D.: 6"
- Body Type: Tube
- Face to Face: 13.12"
- One rotatable flange on each axis
- Through-hole bolt hole flanges
1 in stock
$ 1500.00 US
|
| (Photo shy) |
Kurt J. Lesker C6-1000 Six-Way Cross 10" Flange - Professionally Cleaned
$ 2800.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:- Nominal Flange: 10"
- Tube O.D.: 8"
- Body Type: Tube
- Face to Face: 15"
- One rotatable flange on each axis
- Through-hole bolt hole flanges
2 in stock
$ 2800.00 US
|
|  | Kurt J. Lesker DS275VPS 2 3/4" CF Flanged Shutter
$ 475.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- 90° Sweep
- I.D. 1.51"
- Total Length 6 7/8"
- Flange: 2 3/4" CF
6 in stock
$ 475.00 US
|
|  | Kurt J. Lesker DS600VPS 6" CF Flanged Shutter
$ 595.00 US Please visit: www.torontosurplus.com for further details.
Manual Viewport Shutters have a circular flapper plate, sweeping through 90° mounted on a tangential axis.
SPECIFICATIONS:
- 90° Sweep
- I.D. 6.02"
- Flange: 6" CF
$ 595.00 US
|
|  | Kurt J. Lesker F0450x000N Blank 4 1/2" CF Flange
$ 30.00US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Straight-through holes
- Thickness: 0.680"
$ 30.00US
|
|  | Kurt J. Lesker FN-0275 2 3/4" CF Full Nipple
$ 39.00 US Please visit: www.torontosurplus.com for further details.
FEATURES:-
Coupling to mate two
identical size CF
flanges
- Includes one rotatable and
one nonrotatable CF flange
SPECIFICATIONS:
- Nominal Flange: 2 3/4"
- Tube Outer Diameter: 1 1/2"
- Total Length: 4.93"
1 in stock
$ 39.00 US
|
| (Photo shy) |
Kurt J. Lesker QF16-075-MC QF Cast Aluminium Clamp, Hinged w/ Thumb Screw for 3/4" Tube O.D. QF Components
$ 5.00 US Please visit: www.torontosurplus.com for further details.
$ 5.00 US
|
|  | Kurt J. Lesker QF16-75-SRV Centering Rings for 1/2" QF Components (with O-V314 O-Ring)
$ 9.00 US Please visit: www.torontosurplus.com for further details.
$ 9.00 US
|
|  | Kurt J. Lesker QF25-100-C QF Cast Aluminium Clamp, Hinged w/ Thumb Screw for 1" Tube O.D. QF Components
$ 4.50 US Please visit: www.torontosurplus.com for further details.
Plain aluminium, not black as pictured.
$ 4.50 US
|
|  | Kurt J. Lesker QF25-100-SRV Centering Rings for 1" QF Components (with O-V320 O-Ring)
$ 9.00 US Please visit: www.torontosurplus.com for further details.
$ 9.00 US
|
|  | Kurt J. Lesker QF25x16T QF Tee
$ 35.00 US Please visit: www.torontosurplus.com for further details.
$ 35.00 US
|
|  | Kurt J. Lesker QF40-150-C / MDC 701002 QF Cast Aluminium Clamp, Hinged w/ Thumb Screw for 1 1/2" Tube O.D. QF Components
$ 5.00 US Please visit: www.torontosurplus.com for further details.
The Lesker QF items are Quick Flange components and are also known as KF Klein Flanges. QF is a simple, flexible O-ring vacuum flange system. It is so simple, and flanged components so inexpensive, that QF components are often bought in preference to weldable QF flanges. They are also compatible for vacuum sealing with KF flanges of the same size.
Dimension A (outer length): 3.55"e; approx.
Dimension B (outer thickness): 2.71"e; approx.
61 in stock
$ 5.00 US
|
|  | Kurt J. Lesker QF40-150-SB Blank Flange, Stainless for 2 1/8" Flange / 1 1/2" Tube O.D. QF Components
$ 7.00 US Please visit: www.torontosurplus.com for further details.
6 in stock
$ 7.00 US
|
|  | Kurt J. Lesker QF40-150-SRV Centering Rings for 1 1/2" O.D. Tube QF Components (with O-V326 O-Ring)
$ 9.00 US Please visit: www.torontosurplus.com for further details.
$ 9.00 US
|
|  | Kurt J. Lesker QF40-150-T Tee 2 1/8" QF Flange with 1 1/2" O.D. Tube
$ 45.00 US Please visit: www.torontosurplus.com for further details.
10 in stock
$ 45.00 US
|
|  | Kurt J. Lesker RF1000x800 CF Reduction Flange 10" to 8" - BRAND NEW
Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Adapts 10" CF flange to a 8" CF flange.
- Bore: 6"
BRAND NEW: 2 in stock, $ 195.00 US each
Used: 1 in stock, $ 165.00 US
|
| (Photo shy) |
Kurt J. Lesker RF800x275 CF Reduction Flange 8" to 2 3/4"
$ 85.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Adapts 8" CF flange to a 2 3/4" CF flange.
- Bore: 1 1/2"
1 in stock
$ 85.00 US
|
|  | Kurt J. Lesker RF800x600 CF Reduction Flange 8" to 6"
Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Adapts 8" CF flange to a 6" CF flange.
- Bore: 4"
We have a variety in stock:
- Used , Good Knife Edge - $ 90.00
- Used, with a small nick on the knife edge - $ 50.00 US
|
|  | Kurt J. Lesker RN0800X600 Reduction Nipple - CUSTOM
$ 175.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Fixed Flange:8"
- Rotatable Flange:6"
- Total Length:2.5"
PLEASE NOTE: The catalog shows the RN0800X600 has a total length of 5", but OURS only has a length of 2.5"
$ 175.00 US
|
|  | Kurt J. Lesker VPZL-133 Micro Viewport BRAND NEW!!
$ 66.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Max UHV Pressures: 1 x 10-10 torr
- Optical Disc: Fully Annealed
- Bakeout: 350ºC max
- Max Heating Rate: 2 - 3ºC per minute
$ 66.00 US
|
|  | Kurt J. Lesker VPZL-275 2 3/4" CF Viewport
$ 65.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Max UHV Pressures: 1 x 10-10 torr
- Optical Disc: Fully Annealed
- Bakeout: 350ºC max
- Max Heating Rate: 2 - 3ºC per minute
1 in stock.
$ 65.00 US
|
|  | Kurt J. Lesker VPZL-600 6" CF Flange Glass Viewport - Used
$ 195.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Max UHV Pressures: 1 x 10-10 torr
- Bakeout: 400°C max
- Max Heating Rate: 2-3°C per minute
2 in stock
$ 195.00 US
|
|  | MDC 100032 Blank 10" Rotatable CF Flange
Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Temperature Rating: 450oC max
- Bolt Holes: Clearance
- Flange Diameter: 10"
- Flange Thickness: 0.970"
2 BRAND NEW - Price: $ 159.00 US
2 USED - Price: $ 135.00 US
|
|  | MDC 110025 Blank 6" Del-Seal CF Flange BRAND NEW!!
$ 66.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Temperature Rating: 450oC max
- Bolt Holes: Clearance
- Flange Diameter: 6"
- Flange Type: Non-Rotatable
- Flange Thickness: 0.880"
$ 66.00 US
|
|  | MDC 110030 Blank 8" Del-Seal CF Flange BRAND NEW!!
$ 125.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Temperature Rating: 450oC max
- Bolt Holes: Clearance
- Flange Diameter: 8"
- Flange Type: Non-Rotatable
- Flange Thickness: 0.970"
$ 125.00 US
|
|  | MDC 150036 CF Reduction Flange 10" to 2 1/8" BRAND NEW!!
$ 150.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Adapts 10" CF flange to a 2-1/8" CF flange.
- Bore: 1"
- Temperature Rating: 450 oC max
- Thickness: 0.970"
- Same as Kurt J. Lesker RF1000x218
$ 150.00 US
|
|  | MDC 150038 CF Reduction Flange 10" to 3 3/8" BRAND NEW!!
$ 155.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Adapts 10" CF flange to a 3-3/8" CF flange.
- Bore: 2"
- Temperature Rating: 450 oC max
- Thickness:0.970"
- Same as Kurt J. Lesker RF1000x338
1 in stock
$ 155.00 US
|
|  | MDC 150039 CF Reduction Flange 10" to 4 1/2" BRAND NEW!!
$ 165.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Adapts 10" CF flange to a 4-1/2" CF flange.
- Bore: 1 1/4"
- Temperature Rating: 450 oC max
- Thickness: 0.970"
- Same as Kurt J. Lesker RF1000x450
3 in stock
$ 165.00 US
|
|  | MDC 150043 CF Reduction Flange 10" to 8"
$ 175.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Adapts 10" CF flange to a 8" CF flange.
- Bore: 6"
- Temperature Rating: 450 oC max
- Thickness: 0.970"
- Same as Kurt J. Lesker RF1000x800
2 in stock
$ 175.00 US
|
|  | MDC 409004 Multiport Mini CF Flange 1 x 2 3/4" 4 x 1 1/3 BRAND NEW!!
$ 295.00 US - NEW / $ 270.00 - USED Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Ports angled at 30o
- Four mini flange ports are spaced around a center mini flange port
- Base is a 2 3/4" flange
2 in stock
$ 295.00 US - NEW / $ 270.00 - USED
|
|  | MDC 409008 Multiport Del-Seal CF Flange 1 x 8" 4 x 2 3/4"
Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Ports angled at 13o
- Four 2 3/4" flange ports
- Base is an 8" flange
1 New: Price $ 560.00 US each
2 Used: Price $ 495.00 US each
|
|  | MDC 409011 Multiport Del-Seal CF Flange 1x 8" 6 x 1 1/3 1 x 2 3/4 - BRAND NEW!!
$ 495.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Ports angled at 34o
- Six mini flanges are equally spaced around a 2-3/4" flange
- Base is an 8" Flange
5 in stock
$ 495.00 US
|
|  | MDC 4090xx Multiport, Straight-in Del-Seal CF Flange - BRAND NEW!!
$ 725.00 US Please visit: www.torontosurplus.com for further details.
10" CF Flange with 4 x 2 3/4" CF ports.
2 in stock
$ 725.00 US
|
| (Photo shy) |
MDC 450000 1-1/3 CF Flange/ Mini Flange Glass Viewport BRAND NEW!!
$ 55.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Max UHV Pressures: 1 x 10-10 torr
- Bakeout: 400ºC max
- Max Heating Rate: 10ºC per minute
$ 55.00 US
|
|  | MDC 450006 6" CF Flange Glass Viewport - Used
$ 195.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Max UHV Pressures: 1 x 10-10 torr
- Bakeout: 400ºC max
- Max Heating Rate: 10ºC per minute
1 in stock
$ 195.00 US
|
| (Photo shy) |
MDC 450041 2 1/8" CF Flange Glass Viewport - BRAND NEW!!
$ 60.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Max UHV Pressures: 1 x 10-10 torr
- Bakeout: 400ºC max
- Max Heating Rate: 10ºC per minute
$ 60.00 US
|
|  | MDC 724012 Tee, Reducing Tee NW40 to NW25 (QF40/QF25)
$ 55.00 US Please visit: www.torontosurplus.com for further details.
This may not be an MDC part, but the size etc is the same.
2 in stock
$ 55.00 US
|
|  | MDC 725012 Four-Way Reducing Cross NW40 / NW25 (QF40/QF25) Flange
$ 79.00 US Please visit: www.torontosurplus.com for further details.
Tube Dimensions: 1.25" O.D. , 7/8" I.D. X 2 1/4" O.D. 1 3/8" I.D.
This may not be an MDC part.
1 in stock
$ 79.00 US
|
|  | MDC 824040 Tee 8" Tube O.D. 10" CF Flange - NEW
$ 525.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Distance from Flange to Center: 7.25"
- Pipe Dia: 8"
- Flange: 10" CF
$ 525.00 US
|
|  | MDC 991538 In-Vacuum Crimp Type Connectors - 5/pkg
$ 40.00 US/pkg Please visit: www.torontosurplus.com for further details.
Crimp connectors accept a .056" diameter pin. They are constructed of Nickel-200 material and are capable of withstanding a maximum temperature of 200¡C in vacuum and 150¡C in air.
SPECIFICATIONS:
- Total Length 1.33"
- Barrel: Accepts 0.56" diameter Pin, O.D.: 0.125"
- Tip: O.D. 0.070", I.D. 0.045"
- Packaging: 5 Connectors per package
$ 40.00 US/pkg
|
