|  | Edmund Optics NT53-934 150 Micron Slit Pair MSK #30 - BRAND NEW
$ 35.00 US Please visit: www.torontosurplus.com for further details.
These can be used with the Optometrics Mini-Chrom (see our Scientific, General page).
$ 35.00 US
|
|  | Edmund Optics NT53-935 600 Micron Slit Pair MSK #31 - BRAND NEW
$ 35.00 US Please visit: www.torontosurplus.com for further details.
These can be used with the Optometrics Mini-Chrom (see our Scientific, General page).
$ 35.00 US
|
|  | England Manufactured X-Z Positioning Stage
$ 175.00 US Please visit: www.torontosurplus.com for further details.
Horizontal Travel: 0-27 mmVertical Travel: 0-27 mmHolds Posts from 1/4" to 1/2" diameterDimensions (not including knob): 3" x 4 1/2" x 4 1/2" H (at max height)
$ 175.00 US
|
|  | Lens / Mirror Mount, Adjustable
$ 45.00 US Please visit: www.torontosurplus.com for further details.
The top is spring loaded and the max dimensions are approx 2 1/2" on each axis of the triangle (from deepest point on the plexiglass holder) when fully open, to approx. 1 1/4" when adjusted fully inward. The post is 1/2" diameter.
$ 45.00 US
|
|  | Lens Mounting Flange
$ 20.00 US Please visit: www.torontosurplus.com for further details.
$ 20.00 US
|
|  | MDC 665520 Compact Z Stage 2 3/4" CF Flange
$ 1350.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Bore Size: 1.50"
- Z Travel: 6"
- Flange: 2 3/4"
$ 1350.00 US
|
|  | Melles Griot 07 DUP 011 / DUP011 StableRod 192mm with Removable Base 88mm dia
$ 125.00 US Please visit: www.torontosurplus.com for further details.
StableRods are made of nickel-plated steel.
Dimensional Tolerances: Length: 80.5 mm, Diameter: +0/50.05 mm
Straightness: 0.30 mm per 356 mm of length0
$ 125.00 US
|
|  | Melles Griot 07 HPR 511 / HPR511 MicroLab Single Polarizer Holder - BRAND NEW
Call for price Please visit: www.torontosurplus.com for further details.
This MicroLab polarizer holder is for rotating either one single polarizers. This precision single polarizer
holder mounts 12.5-mm to 12.7-mm polarizers up to 8-mm thick (polarizer not included).
Call for price
|
|  | Melles Griot 07 HPV 501 / HPV501 MicroLab Double Polarizer Holder - BRAND NEW
Call for price Please visit: www.torontosurplus.com for further details.
This MicroLab polarizer holders is for rotating two polarizers. This double polarizer holder allows rotation of one polarizer relative to another and mounts polarizers up to 5.5 mm thick (polarizers not included).
Call for price
|
|  | Melles Griot 07 TTC 501 / TTC501 Prism/Tilt Table with Rotation - BRAND NEW
Call for price Please visit: www.torontosurplus.com for further details.
This tilt table is ideal for aligning prisms and cube beamsplitters.
With 85 degrees of tilt in both axes and a full 360 degrees of
rotation, alignment to other components is simple. Precision
0.35-mm-pitch (73-TPI) stainless-steel adjustment screws provide
15 arc second resolution. The platform can be rotated by hand and
the position locked with a thumbscrew.
Call for price
|
|  | Melles Griot 07 TTD 501 / TTD501 MicroLab Component Retainer for 07 TTC 501 Tilt Table
Call for price Please visit: www.torontosurplus.com for further details.
This Retainer clamps your Beam Splitter securely to your tilt table.
Call for price
|
|  | Melles Griot 17 AMA 007 /AMA007 Nanopositioning Short Fixed Platform Bracket - BRAND NEW
$ 47.00 US Please visit: www.torontosurplus.com for further details.
Fixed platform brackets mount directly to the side of positioners and are secured with M3 capscrews. When the brackets are secured, the mounting surface is in line with the nominal platform height of the moving platform. Fixed platform brackets may be mounted in two alternative positions which, with the option of rotating the top mounting plate of the positioner by 90 degrees, ensures that the user always has the most convenient access to the x-y-z drives. This also offers greater flexibility when configuring an experiment on an optical table. Fixed and moving platforms can be nested together in a variety of ways without the need to specify left- or right-handed positioners. There are two fixed platform brackets.
Dimensions: 62.5 mm H x 60.5 mm W x 26 mm L
$ 47.00 US
|
|  | Melles Griot 17 AMA 009 /AMA009 Nanopositioning Fixed Platform Bracket - BRAND NEW
$ 55.00 US Please visit: www.torontosurplus.com for further details.
Dimensions: 62.5 mm H x 60.5 mm W x 56 mm L
$ 55.00 US
|
|  | Melles Griot 17 AMB 503/R / AMB503/R RollerBlock X-Y-Z Cross-Roller Bearing Translation Sage, Right-Handed
$ 1100.00 US Please visit: www.torontosurplus.com for further details.
The RollerBlock is an x-y-z cross-roller-bearing stage with 13-mm of travel on all axes. The stage is available in both left- and right-handed versions and features enclosed bearings to keep dirt out, and side preloading screws to maintain the preload on the bearings during the life of the stage.
The top plate of the stage incorporates the standard tongue-in-groove fittings common to all Melles Griot stages. This plate can be rotated through 90 degrees.
Drive options (not included), based on a standard 3/8-inch (9.5-mm) bush fitting, range from simple micrometer to combined differential micrometer with feedback piezo element .
FEATURES:
- 13-mm travel
- Easy access preload screws
- High load capacity
- Easy conversion to 5-axis stage using 17 ATP series tilt platforms
SPECIFICATIONS:
- Travel: 13 mm (mechanical)
- Load Capacity: 4 kg
- Vacuum Compatibility: 10-4 Pa
- Resolution:
Micrometer drive: 2000 nm
Differential drive: 100 nm
Differential micrometer: 100 nm
Micrometer and feedback piezo: 10 nm
- Weight: 1 kg
- Platform: 60 mm x 60 mm
$ 1100.00 US
|
| (Photo shy) |
Melles Griot 17 ANA 002 / ANA002 Nanopositioning Fixed Platform, 125 mm Fixed Platform
Call for price Please visit: www.torontosurplus.com for further details.
Fixed platforms, stationary platforms with a standard slotted top
surface that attaches directly to the optical table, are designed to
match the heights of the MicroBlock and NanoBlock systems:
75 mm and 125 mm, respectively.
Call for price
|
|  | Melles Griot 17 DRV 504 / DRV504 Differential Micrometer Drive - BRAND NEW
$ 299.00 Brand New Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS:
- Travel (mm): Coarse-13.0, Fine-0.4
- Graduations (µm): Coarse-10.0, Fine-1.0
- Resolution/Sensitivity (µm): Coarse-1.0, Fine-1.0
2 in stock
$ 299.00 Brand New
|
|  | Melles Griot 17 HCS 001 / HCS001 Nanopositioning Spherical Ball Lens Holder / Coupling Sphere - BRAND NEW
Call for price Please visit: www.torontosurplus.com for further details.
Ball lenses, or coupling spheres, are often used to couple fibers to diodes or detectors. When used to couple two fibers together, they create an expanded beam, and lateral misalignment is less sensitive than when the fibers are directly butt-coupled. Ball lenses offer high coupling efficiency and provide an alternative to the use of microscope objectives or gradient-index lenses. The 17 HCS series of spherical ball lens holders feature a common brass housing with two clamping rings specific to the lens diameter being mounted.
This 001 is designed for 2-mm-diameter lenses and has an O.D. of 25 mm.
Call for price
|
|  | Melles Griot 17 HCS 003 Nanopositioning Spherical Ball Lens Holder / Coupling Sphere - BRAND NEW
Call for price Please visit: www.torontosurplus.com for further details.
The 17 HCS series of spherical ball lens holders feature a common brass housing with two clamping rings specific to the lens diameter being mounted.
This 003 is designed for 5-mm-diameter lenses and has an O.D. of 25 mm.
Call for price
|
|  | Melles Griot 17 HWM 001 Nanopositioning Waveguide Mount - BRAND NEW
$ 49.00 US Please visit: www.torontosurplus.com for further details.
The 17 HWM series of standard waveguide mounts is used to mount customer-supplied waveguide devices. All waveguide mounts are supplied with a tongue that fits snugly into the locating slots of the nanopositioner platforms or brackets. Users can glue experimental devices directly to the waveguide mounts. They are designed to accommodate different size devices while allowing access for single-mode fibers or microscope objectives.
Dimensions: 10 mm L x 9.5 mm H x 32 mm W
Clearance to the Nominal Optical Axis: 3 mm
$ 49.00 US
|
|  | Melles Griot 17 HWM 002 Nanopositioning Waveguide Mount - BRAND NEW
$ 49.00 US Please visit: www.torontosurplus.com for further details.
Dimensions: 15 mm L x 9.5 mm H x 32 mm W
Clearance to the Nominal Optical Axis: 3 mm
$ 49.00 US
|
| (Photo shy) |
Melles Griot 17 HWM 003 Nanopositioning Waveguide Mount - BRAND NEW
$ 49.00 US Please visit: www.torontosurplus.com for further details.
Dimensions: 35 mm L x 9.5 mm H x 32 mm W
Clearance to the Nominal Optical Axis: 3 mm
$ 49.00 US
|
|  | Melles Griot 17 OBC 007 UltraPerformance Optical Breadboard / Optical Table
$ 1800.00 US Please visit: www.torontosurplus.com for further details.
Our very best breadboards, the UltraPerformance™ series combines the features of our PerformancePlus™series with enhanced durability, lighter weight, and a variety of features for convenience and accessibility. These breadboards are ideal for any laboratory, prototyping, or OEM application.FEATURES:
- A black matte finish reduces reflection and backscatter
- Access wells at each corner facilitate mounting the breadboard onto fixtures, stand-off posts, or rubber feet. Larger breadboards include an access well in the center of the breadboard to maintain
flatness when mounted.
- The aluminum core significantly reduces weight.
- A T-slot groove around the breadboard perimeter is ideal for mounting accessories and attaching protective covers (Protective Cover included).
SPECIFICATIONS:
- Flatness: 80.10 mm (0.004 in.) over any 0.25-m2 area
- Thickness: 55 mm (2.2 in.)
- Construction: Triple-plate, double-honeycomb-core, athermalized design with matching plate materials for maximum thermal stability
- Damping: Enhanced
- Main Core: High-density aluminum honeycomb
- Edge of Top Plate to First Hole: Inch: 2 in / Metric: 50 mm
- Maximum Screw Depth: 16 mm (5/8 in.) from breadboard surface
- Weight & Dimensions: 0.6 m x 1.2 m x 55mm (2' x 4' x 2.25"), 80 kg/175 lbs
- Access Holes: 32-mm diameter lined well with cover cap
Additional specifications available upon request.
The model number is not on the breadboard, so I deduced the number based on the size, finish, holes etc.
$ 1800.00 US
|
|  | Melles Griot Tilt Stage
Call for price Please visit: www.torontosurplus.com for further details.
This compact stage provides tilt on 3 axes to a mounting platform, Adjustment is provided by 3 stainless steel, fine thread thumbscrew drives. There are 4 x 1/8" mounting holes on the base. If you want to use it as a 1/2" mirror mount (plate not incl). you can side mount using the 1/4-20 mounting hold on 1 side or M6 mounting hole on another side. It measures 50 mm x 50 mm x 20 mm fully closed.
Call for price
|
|  | Newport 462 Series M-462-X-M ULTRAlign Integrated Crossed-Roller Bearing Linear Stage - BRAND NEW
Please visit: www.torontosurplus.com for further details.
These stages feature stainless steel construction for high stability, with thermally matched, hardened steel crossed-roller bearings for unsurpassed performance. The crossed-roller bearings and precision-manufactured bearing reference surfaces provide exceptionally linear travel, with angular deviation better than 100 µrad about any axis.
ULTRAlign stages overcome the limitations of multi-axis stages derived from traditional tooling industry designs. The actuators are located out-of-the-way of oversized loads. Z-axis stages do not depend on springs for support, ensuring maximum vertical load capacity.
FEATURES:
- Stainless steel construction with crossed roller bearings for high stability and rigidity
- Angular deviation better than 100 µrad about any axis—guaranteed
SPECIFICATIONS:
- 1 " Travel
- Mounting Base: 2 1/2" x 3 1/2" with 4 mounting slots
- Mounting Platform: 2 1/2" x 2 1/2" with 12 x M6 holes
Actuator/Micrometer Sold Separately
Brand New Unit - $ 350.00 US
Used Unit - $ 295.00 US
|
|  | Newport 462 Series M-462-XY-M ULTRAlign Integrated Crossed-Roller Bearing Linear Stage
$ 525.00 US Please visit: www.torontosurplus.com for further details.
FEATURES:
- Stainless steel construction with crossed roller bearings for high stability and rigidity
- Angular deviation better than 100 µrad about any axis—guaranteed
SPECIFICATIONS:
- 1 " Travel
- Mounting Base: 2 1/2" x 3 1/2" with 4 mounting slots
- Mounting Platform: 2 1/2" x 2 1/2" with 12 x M6 holes
Actuators/Micrometers Sold Separately
$ 525.00 US
|
|  | Newport 462 Series M-462-XZ-M ULTRAlign Integrated Crossed-Roller Bearing Linear Stage - BRAND NEW
$ 665.00 US Please visit: www.torontosurplus.com for further details.
FEATURES:
- Stainless steel construction with crossed roller bearings for high stability and rigidity
- Angular deviation better than 100 µrad about any axis—guaranteed
SPECIFICATIONS:
- 1 " Travel
- Mounting Base: 2 1/2" x 3 1/2" with 4 mounting slots
- Mounting Platform: 2 1/2" x 2 1/2" with 12 x M6 holes
Actuators/Micrometers Sold Separately
$ 665.00 US
|
|  | Newport 462 Series M-462-Z-M ULTRAlign Integrated Crossed-Roller Bearing Linear Stage - BRAND NEW
Please visit: www.torontosurplus.com for further details.
FEATURES:
- Stainless steel construction with crossed roller bearings for high stability and rigidity
- Angular deviation better than 100 µrad about any axis—guaranteed
SPECIFICATIONS:
- 1 " Travel
- Mounting Base: 2 1/2" x 3 1/2" with 4 mounting slots
- Mounting Platform: 2 1/2" x 2 1/2" with 12 x M6 holes
Actuator/Micrometer Sold Separately
Brand New Unit - $ 425.00 US
Excellent Used Unit - $ 360.00 US
|
|  | Newport F-91TS Tilt Stage for Fiber Couplers Model F-915, F-916 & F-91-C1
$ 250.00 US Please visit: www.torontosurplus.com for further details.
$ 250.00 US
|
|  | Newport FPH-L Rod Lens Holder - BRAND NEW
$ 42.00 US Please visit: www.torontosurplus.com for further details.
This lens holder holds gradient index (GRIN) lenses and other miniature optics with diameters up to 2 mm. It inserts into any FP Series positioner and has a detent alignment groove that engages with the positioner to keep the lens horizontal. A burr-free sliding clip holds the optic securely in the V-groove.
$ 42.00 US
|
|  | Newport M-MM2-1A Mirror Mount with Mounting Post and Bonus Convex Lens
Call for price Please visit: www.torontosurplus.com for further details.
This mirror mount is angle adjustable along 2 axes using fine threaded screws & holds 1" diameter mirrors.
Call for price
|
|  | Newport MM2-1A Mirror Mount
Call for price Please visit: www.torontosurplus.com for further details.
This mirror mount is angle adjustable along 2 axes using fine threaded screws & holds 1" diameter mirrors.
Call for price
|
|  | Newport MS-500-XYZ Micropositioner
$ 325.00 US Please visit: www.torontosurplus.com for further details.
The MS Series offers unmatched performance in an extremely small package. Ideal for applications where precision is required but space is limited.
Hardened precision rods are preloaded against a four corner hardened slider for smooth, wear-resistant motion. A return spring provides built-in preload to eliminate backlash. The unique carriage design eliminates wobble while providing an extremely robust stage.
MS-500 Series offers 0.5 in. (12.7 mm) travel for loads up to 0.75 lb (3.3 N). Both stages utilize a precision 80 TPI adjustment screw to provide unmatched resolution in stages of this size.
$ 325.00 US
|
|  | Olympus IX-MVR Joystick Assembly for Mechanical XY Stage
$ 650.00 US Please visit: www.torontosurplus.com for further details.
$ 650.00 US
|
|  | Optikon Rail Carrier for Triangular Rail
$ 37.95 US Please visit: www.torontosurplus.com for further details.
$ 37.95 US
|
| (Photo shy) |
OptoSigma 088-1130 Precision Air Slits - BRAND NEW
$ 46.75 US Please visit: www.torontosurplus.com for further details.
The precision air slits are formed by etching a thin foil of stainless steel. They are extremely light and compact being highly suitable for OEM applications. If required these slits can be supplied with a black coating on the reverse and mounted on a one inch diameter blackened disc for protection and ease of handling.
SPECIFICATIONS & TOLERANCES:
- Diameter: 9.5 mm
- Thickness: 12.5 microns
- Slit length: 3mm
- Centration: +0.1mm
- Slit width: +10% (5 micron slit is +20%)
- Material: Non-magnetic stainless steel
SPECIFICATIONS UNIQUE TO THIS SLIT:
- Slit Width (µm): 10.0
$ 46.75 US
|
|  | OptoSigma 149-0040 Base Clamp with Screw - BRAND NEW
$ 7.95 US Please visit: www.torontosurplus.com for further details.
This clamp may be used to secure a base or other object onto an optical breadboard or table. It has a long slot for flexibility of positioning and a cap screw which allows for easy clamping and removal.
SPECIFICATIONS:
- Length: 60 mm
- Width: 20 mm
- Lip: 17 mm
- Positioning Slot: 25 mm
$ 7.95 US
|
|  | OptoSigma 155-0140 Optical Mini-Rail
$ 40.00 US Please visit: www.torontosurplus.com for further details.
SPECIFICATIONS & TOLERANCES:
- Dimensions: +0.2mm
- Material: Aluminum
- Finish: Black anodized
- Width: 19 mm
- Length: 11.81", 300.0 mm
$ 40.00 US
|
|  | OptoSigma 155-2020 Mini-Rail Kit / Optical Mini-System Kit
$ 2250.00 Please visit: www.torontosurplus.com for further details.
One Stop Shopping!
This Mini Optical Kit offers you an array of the most commonly used items in order to simplify the selection of components. Each kit has a complete range of mini-system products ready for use, and contains both base mounted components and rails supplied in a convenient carrying case with cut-out foam to hold the items in place.
You can click HERE to see close-ups of the components.
Content of Mini-system Kit
|
Product Number
|
|
 |
Description
|
|
Quantity Included in Mini-rail Kit 155-2020
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
155-0110
|
|
Mini-rail (50mm)
|
2
|
|
155-0120
|
|
Mini-rail (120mm)
|
2
|
|
155-0130
|
|
Mini-rail (200mm)
|
1
|
|
155-0220
|
|
Mini-carrier (12mm)
|
4
|
|
155-0230
|
|
Mini-carrier (25mm)
|
4
|
|
155-0340
|
|
Mini-post (15mm)
|
2
|
|
155-0450
|
|
Mini-post holder (20mm)
|
2
|
|
155-0470
|
|
Mini-post holder (30mm)
|
6
|
|
155-0490
|
|
Mini-post holder (40mm)
|
4
|
|
155-0660
|
|
Mini-post base (small)
|
2
|
|
155-0670
|
|
Mini-post base ( adjustable)
|
1
|
|
155-0680
|
|
Mini-post base (large)
|
1
|
|
155-1890
|
|
Mini-cross clamp (rotary)
|
1
|
|
155-1124
|
|
Mini-mirror mount (1/2") with post
|
4
|
|
155-1222
|
|
Mini-beamsplitter holder (15mm) with post
|
1
|
|
155-1380
|
|
Mini-lens holder (15mm) with post
|
2
|
|
155-1390
|
|
Mini-lens holder (5-15mm) with post
|
2
|
|
155-1440
|
|
Mini-prism table (<10mm)
|
1
|
|
155-1580
|
|
Mini-polarizer holder (15mm) with post
|
1
|
|
155-1670
|
|
Mini-iris diaphragm (1-12mm) with post
|
1
|
|
155-1770
|
|
Mini-filter holder (10-20mm) with post
|
1
|
|
124-0010
|
|
Mini-rotation stage
|
1
|
|
123-2220
|
|
Mini-tilt stage
|
1
|
|
199-0220
|
|
Mini-spacer (5mm)
|
2
|
|
199-0222
|
|
Mini-spacer (10mm)
|
2
|
|
199-0990
|
|
Carrying case with Keys
|
1
|
|
|
|
Mini Collars for Posts
|
10
|
|
149-0045
|
|
Base clamp with screw
|
2
|
|
07HPR511
|
|
Melles Griot Microlab rotary polarizer holder
|
1
|
|
MS-500-X
|
|
Newport Miniature linear stage
|
1
|
|
MS-500-XY
|
|
Newport Miniature linear stage
|
1
|
$ 2250.00
|
|  | Parker Daedal Linear Slide - Metric
$ 70.00 US Please visit: www.torontosurplus.com for further details.
3" L x 1 3/4" W x 11/16" H, 2" Travel
3 in stock
$ 70.00 US
|
|  | Prior Scientific H107 / H107PIX 4" x 3" Travel, Programmable, Motorized Stepper Stage for Inverted Microscope
Call for price Please visit: www.torontosurplus.com for further details.
an inverted microscope for biomedical or material science applications, Prior has a precision programmable stage for you: the H107. The H107 adapts to virtually any inverted microscope or optical system. It allows you to perform scanning using a very broad range of sample holders, including microtitre plates, slide holders, petri dishes, well plates, flasks, haemocytometers
and metallurgical sample holders (not included). This stage offers a unique combination of precision and flexibility.
Prior stages have a well-deserved reputation for quality and repeatability. They are manufactured using the highest quality components: crossed roller ways, zero backlash recirculating ball screws, X and Y limit switches, two high precision stepper motors-even a tough scratch resistant coating. They are available with standard and custom sample holders to suit the user’s application and requirements.
Stages can be driven by the Prior series of motor controllers (not included) or compatible systems in existing OEM configurations. The controller can be accessed via RS-232 serial port or with an optional joystick (not included) or keyboard (not included).
FEATURES:
- Travel 108 mm x 69 mm (4" x 3")
- Repeatability to 0.3 microns with
linear scales
- Minimum step size (resolution) of the
stage is 0.04 microns, depending on
the controller configuration or mount
We believe this unit was used with the Olympus IX50 or IX70 Inverted Microscope.
Stage Only: No plates, controllers etc
Call for price
|
|  | Support Rod with Base
Call for price Please visit: www.torontosurplus.com for further details.
Base Diameter: 3 1/16" dia
Rod Diameter: 1/2" with 1/4" dia threads)
Total Height: 10 1/8" (including top threads)
Call for price
|
|  | z SAMPLE CONFIGURATION ONLY z
We just wanted you to see 1 of the many possiblities using the parts on this page
Please visit: www.torontosurplus.com for further details.
|
