AccuFiber / Luxtron 100C Optical Fiber Temperature Control System
Used in the following applications: Semiconductor Wafer Processing, Glass Optical Fiber Drawing, Heat Treatment in Induction Furnaces, Sintering, Combustion Research.
Features:

Hamamatsu H6240-02 Photon Counting Head
H6240 Series are photon counting heads incorporating a PMT, high speed amplifier/discriminator/high voltage power supply circuits in a housing.

FEATURES:
• Compact / TTL Output, Integrated Photon Counting Circuit, with Low Noise Photomultiplier Tube and Power Supply
• No adjustments required
• High voltage power supply incorporated
• Requires only +6 Vdc source
• Compact and lightweight
• Spectral Response: 185nm to 900 nm

APPLICATIONS:
• Chemiluminescence detection
• Bioluminescence & fluorescence detection
• Other low level light detection

Hamamatsu H7421-40 Photon Counting Head with M9011 Power Supply & Olympus Lens
The H7421-40 contains a photomultiplier tube having a GaAsP photocathode. The unit also has a thermoelectric cooler, which reduces thermal noise generation by keeping the photocathode at a constant temperature.

SPECIFICATIONS:
• Spectral Response Range: 300nm - 720nm
• Peak Wavelength: 550 nm
• Cathode Type: GaAsP

Harmonic Generator / Wavelength Convertor
Harmonic generators are used to convert wavelengths. This unit has a few crystals inside, but we do not have any information or specifications for this unit.
The unit measures approx. 8" x 6" x 6" (not including the base)

Please CLICK HERE to see an array of photos.
Call for price

Newport 818-IR Germanium Detector (800–1800 nm) with Matched OD3 / 883-IR Attenuator
The 818 Series Cylindrical Detectors (818-UV, 818-SL, 818-IR, 818-IG) are offered for broad wavelength ranges covering UV, visible, near-IR, and IR regions. They use the finest large-area planar-diffused PIN silicon, indium gallium arsenide, germanium PIN or inverted-channel silicon detectors. Each is optimized for zero-bias operation to provide the low noise, high stability and uniformity demanded by critical radiometric measurements. Compact packaging, universal mounting holes and BNC-terminated cabling make incorporation into experimental, production and field applications straightforward.

Comes with the Manual
Spectral Range: 0.78-1.8 µm , complete specifications available upon request.
1 in stock
$ 395.00 US

Newport 818-SL Calibration Module 818 Series Detectors
2 in stock
Call for price

Newport 818-SL Germanium Detector (800–1800 nm) with Matched OD3 / 883-IR Attenuator

Newport 818J-08B Pyroelectric Energy Detector with Mounting Post
Precise measurements of pulsed laser energy can be accomplished with Newport’s 818J Series Energy Detectors, which utilize crystalline pyroelectrics. This detector is packaged in an EMI-shielded cylindrical housing that mounts directly to our English posts. Calibrated measurements can be performed by ordering the /CM versions of these detectors for use with Newport’s 1835-C and 2835-C Optical Meters.

The 818J-08B detector features a compact, low-profile design, thus allowing energy measurements in very tight spaces. This detector can be used on its back or mounted on a post, for either vertical laser setups or horizontal laser beams.

SPECIFICATIONS:
• Spectral Range : 0.19 µm - 20.0 µm
• Maximum Energy: 25 mJ (at 15 sec pulse width)
• Maximum Pulse Width: 50 µs

Newport 818J-50B / 818J-50B/CM Pyroelectric Energy Detector with Calibration Module
Precise measurements of pulsed laser energy can be accomplished with Newport’s 818J Series Energy Detectors, which utilize crystalline pyroelectrics. This detector is packaged in an EMI-shielded cylindrical housing that mounts directly to our English posts.

Calibrated measurements can be performed by ordering the /CM versions of these detectors for use with Newport’s 1835-C and 2835-C Optical Meters.

Large expanded beams can be accommodated with detector diameters of 25 and 50 mm. Black-organic coated 818J-25B and 818J-50B detectors are suitable for most applications. This coating flattens spectral response from UV to deep IR and eliminates beam retro-reflection, while providing more damage resistant operation, but repetition rates are limited to 50 and 100 pps respectively.

SPECIFICATIONS:
• Spectral Range : 0.19 µm - 20.0 µm
• Maximum Energy: 1.01 J (at 15 sec pulse width)
• Maximum Pulse Width: 400 µs

Newport 883-SL OD3 Attenuator for 818 Series Detectors
Pictured is the 883-IG, but the 883-SL looks the same.
3 in stock.
Call for price

Newport 883-UV OD3 Attenuator for 818 Series Detectors
Pictured is the 883-IG, but the 883-UV looks the same.
$ 49.00 US

Oriel 7072 Detection System Unit

$ 875.00 US