Sorted by Manufacturer

[A]  [B]  [C]   [D]  [E]  [F]  [G]  [H]  [I]  [J]   [K]  [L]  [M]  [N]  [O]  [P]  [Q]   [R]  [S]  [T]  [U]  [V]  [W]  [X]   [Y]  [Z]

A

Atlas Copco Power Focus Tensor S 2101-S4-230R 2101Computer Controlled Nut Driver/Torque Tool
Call for price  Please visit: www.torontosurplus.com for further details.
Tensor-S electric nutrunners are backed up by the versatility, flexibility and wide range of functions derived from the Atlas Copco FOCUS 2000 control and monitoring system.
POWER FOCUS 2000, the Tensor Control Unit with Servo, offers you a purpose-built system, ideal for the latest state of the art, with full sine modulation and digital current control.
The system supports the zero fault philosophy and includes a wide range of tightening functions. The straightforward, menu-driven programming saves time and reduces costly downtime.

Touch Panel programming enclosed in a locking cabinet (keys included) to deter tampering.
Type 2101-S4-230R ( 8433 0530 60 )
Power Requirements: 220-240 VAC, 50/60 Hz, 200 W

Comes with the ETD S4-20-10-CTADS ( 8433 0239 72 ) Torque Driver with 3/8" head, Torque: 1-50 Nm / .7-3.6 ft lb
Call for price

B

Boehler Box Creasing Rule WRT-.907, 65 pc / Box
Call for price  Please visit: www.torontosurplus.com for further details.
Böhler Creasing Steel Rules:

These are WRT (Wide Round Top), 2/3 pt, .907 mm thick,
765mm long (30 1/8") long, LASER CREASE rules.

All Böhler Rules are laser accurate achieved through
great accuracy of shape and dimensions.
Product Information:
The Quality of the creasing rules is equally as importent as the quality of the cutting rules.
The design of boxes is becoming ever more complex and due to the continually increasing speed of packaging production machinery, the use of high quality creasing is becoming more and more important.
Böhler, therefore, produces a wide range of creasing rules which equal Böhler cutting rules in their accuracy:

  • Very smooth crease head surface.
  • A perfectly radiused, smooth profile.
  • A flowing continuity from the radiused profile to the side faces of the rule.
  • Minimum eccentricity.
  • Minimum height tolerances.
  • Rule thickness complementary to cutting rules.
  • SUPREME - coating possible.

    • Call for price

    C

    Chatillon DST Series / DST 44 / DST44 Digital Spring Tester
    $2400.00 US  Please visit: www.torontosurplus.com for further details.
    0-44 lbs, 8" Travel
    $2400.00 US

    CKD Cylinder Press STLB-50200-F
    Call for price  Please visit: www.torontosurplus.com for further details.
    Rated 0.1-1.0 MPa
    Call for price

    D

    DE-STA-CO Horizontal Handle Hold-Down Clamp, Stainless (may be P/N 305-USS)
    $ 12.50 US each  Please visit: www.torontosurplus.com for further details.
    Low profile hold-down clamps feature a handle that can be operated from either sides or from behind.U-bar model includes bonded neoprene tipped spindle Roughly 2"X2 1/4" when fully open, this hinge-type mechanism locks and releases a soft rubber stopper.
    Brand new and unused!
    $ 12.50 US each

    Drill Bit 3/8" HSS (High Speed Steel), Jobber Length.
    $ 2.50 US each  Please visit: www.torontosurplus.com for further details.
    These are Quality, USA made bits.
    Approx. 675 pieces in stock - Bulk quantity orders are welcome.
    Call for details.
    $ 2.50 US each

    Drill Bit, Skill 1" Hammer
    $ 15.00 US  Please visit: www.torontosurplus.com for further details.
    Brand new unused.
    $ 15.00 US

    E

    Enerpac Punch Knockout Hydraulic Driver, Model 7306 AA1840
    $ 675.00 US per set  Please visit: www.torontosurplus.com for further details.
    Complete With Case and Manual. They are used but in good working condition.
    Driver #1 Punches
    1/2" Conduit 7/8 dia. 2 point Greenlee 500-4006
    3/4" Conduit 2 point Greenlee 500-4008
    1" Conduit 2 point Greenlee 500-4010
    1" Enerpac 4 point KP1000
    1 1/4" Conduit 2 point Greenlee 500-6974
    1 1/4" Enerpac 4 point KP1240
    1 1/2" Conduit 2 point Greenlee 500-6978
    2 1/2" 2 point punch

    Driver #2 Punches
    1/2" Conduit 7/8 dia. 2 point Greenlee 500-4006
    3/4" Conduit 2 point Greenlee 500-4008
    1" Conduit 2 point Greenlee 500-4010 (2pc)
    1 1/4" Conduit 2 point Greenlee 500-6974
    1 1/2" Enerpac 4 point KP1500
    1 1/2" Conduit 2 point Greenlee 500-6978
    2" 2 point Greenlee 500-4062

    Driver # 1 has a large "double" nut (shown in picture) Driver # 2 has a ball bearing wheel attachment (not pictured). Both come with a variety of bolts, threaded couplers and spacers.
    $ 675.00 US per set

    F

    Filter Housing & Puller
    $ 10.00 US  Please visit: www.torontosurplus.com for further details.
    Input/Output 1/4" hole diameter, Outer Shell 2 7/16" diameter,
    Inner screen 1 9/16" diameter, Total length approx. 3 3/4".
    BRAND NEW!!
    20 in stock.
    $ 10.00 US

    Futuretek 1 1/2" Helical Carbide Milling Cutter
    Call for price  Please visit: www.torontosurplus.com for further details.

      DIMENSIONS:
    • Length: 6 1/4"
    • Dia, w/o carbide inserts: 1 3/8 "
    • 2" shank

    Call for price

    Futuretek 2 1/2" Helical Carbide Milling Cutter
    Call for price  Please visit: www.torontosurplus.com for further details.

      DIMENSIONS:
    • Length: 8"
    • Dia, w/o carbide inserts: 2 1/2"
    • 2" shank

    Call for price

    Futuretek 2" Helical Carbide Milling Cutter
    Call for price  Please visit: www.torontosurplus.com for further details.

      DIMENSIONS:
    • Length: 6 3/4"
    • Dia, w/o carbide inserts: 1 14/16 "
    • 2 3/8" shank

    Call for price

    Futuretek 4" Face Mill Cutter
    Call for price  Please visit: www.torontosurplus.com for further details.
    This cutter is ideal for very large depth of cut and for turn-milling operations.

      DIMENSIONS:
    • Face Dia: 3"
    • Height: 2"
    • Dia: 4"

    Call for price

    Futuretek 5 1/2" Face Mill Cutter
    Call for price  Please visit: www.torontosurplus.com for further details.
    This cutter is ideal for very large depth of cut and for turn-milling operations.

      DIMENSIONS:
    • Face Dia: 4"
    • Height: 2 1/5"
    • Dia: 5 1/2"

    Call for price

    G

    Genuine Peacemaker Brand Parts # 177000, Contact Tip for 0.045" wire
    Call for price  Please visit: www.torontosurplus.com for further details.
    Contact tip for 0.045" wire (0.054" I.D.)
    10pcs per pkg. (36 pkgs in stock). We also have one pkg with 49pcs.
    Call for price

    Greenlee Tool Co. Knockout Punch Set 9/16" Diameter
    Call for price  Please visit: www.torontosurplus.com for further details.
    Brand new in box.
    64 in stock.
    Call for price

    GTE Brazing Filler Metal
    Call for price  Please visit: www.torontosurplus.com for further details.
    yellow, brown, blue
    Call for price

    H

    High Speed Side Milling Cutter - Straight Tooth, Sharpened
    $ 49.00 US each  Please visit: www.torontosurplus.com for further details.
    5/8" face width
    5" diameter
    1" diameter Arbor (hole)
    We have a few in stock so please advise quantity required.
    $ 49.00 US each

    Hioki 3150 Earth Resistance Meter / Earth Hi Tester HiTester
    $ 525.00 US  Please visit: www.torontosurplus.com for further details.
    The 3150 earth tester exceeds the JIS C-1304 standard.
    Measure in ranges of 10 ohms, 100 ohms and 1000 ohms
    with an accuracy of +- 2.5%.
    This unit comes with probes and manual.
    $ 525.00 US

    Hotip H-303CD - Wire Stripper Base Unit Only, No Tweezers
    $ 99.00 US  Please visit: www.torontosurplus.com for further details.
    Runs on 120VAC, uses pedal for control and temperature control settings, Great for Stripping Teflon wire. It can strip up to 12 gauge, and maybe some 10 gauge (if the jacket isn't too thick).
    8" W, 5 1/2" D, 4 1/2" H
    $ 99.00 US

    Hughes Pull-thru insertion tool.
    $ 249.00 US  Please visit: www.torontosurplus.com for further details.
    Wooden case with tool, Pin tip, key, Socket test Gauge
    $ 249.00 US

    I

    J

    Jameson 8-18-100 Wee Buddy Fiberglass Fish Tape
    $120.00 US  Please visit: www.torontosurplus.com for further details.
    1/8" x 100' in a lightweight, compact unit. There are currently three of these new-in-box spools available.
    $120.00 US

    JET Carbide Burs, Dental
    Call for price  Please visit: www.torontosurplus.com for further details.
    The burs come 6/pkg and we have 10 new, unused packages.
    168 007 012 (0485.45)
    Call for price

    K

    L

    Lexan Stand with Bubble Level
    $ 4.99 US  Please visit: www.torontosurplus.com for further details.
    For use with ball flowmeters.
    Use for many applications, level can be removed from the stand.
    $ 4.99 US

    M

    N

    O

    P

    Pace Minichine / Dremel Abrasive Grinding Sanding Bits
    12 pack
    $ 17.50 / pack  Please visit: www.torontosurplus.com for further details.
    You get 12 BRAND NEW bits in the package.
    Shaft diameter is 3/32" x 1 19/32" Long.
    Head diameter tapers from 1/8" to 1/6" x 9/32" Long.
    All dimension are approximate.
    $ 17.50 / pack

    Q

    R

    S

    Simco M30 Continuity Indicator
    Call for price  Please visit: www.torontosurplus.com for further details.
    Wrist Strap Test, Soldering Iron Test, Conductivity Test & Wrist Ground with Audible Alarm
    Call for price

    Simco M50A Wrist Strap Monitor ESD
    $ 45.00 each for M50A + $ 5.50 for strap Please visit: www.torontosurplus.com for further details.
    120 VAC, 50/60 Hz, 12.5 mA.
    For use with standard Wrist Straps (not included), this unit has an audible alarm.
    If you require a wrist strap please ask us to include it in the quotation.
    $ 45.00 each for M50A + $ 5.50 for strap

    Split Bubble Inclinometer / Abney Level Clinometer / Angle Sextant
    BRAND NEW !!
    $ 65.00 US  Please visit: www.torontosurplus.com for further details.
    The Abney level is used to measure the vertical angle or inclination. It consists of an eyepiece and an adjustable tubular spirit level which is connected to a vertical scale. When viewing through the eyepiece, there is a horizontal index line that is aligned over the object being measured and adjacent to the object is a reflected image of the tubular spirit level as viewed from underneath. The level is adjusted until the bubble is centered and aligned to the horizontal index line. The angle of inclination or declination is then read from the vernier scale.


    This inclinometer has a square sighting tube and precision brass fittings.
    The scale has a +/- 60 degree range and +/- 150 percent range and it measures 6 5/16" long including eyepiece.
    This inclinometer comes with a Leather Case.
    2 in stock
    $ 65.00 US

    T

    Tohnichi / Mountz RTD & LTD Torque Screwdrivers 12RTD, 100LTD
     Please visit: www.torontosurplus.com for further details.
    These precision screwdrivers are torque-adjustable, so you can set the value within 3% accuracy and ensure that you are not over-torquing any screws. Also features a ring for locking the desired setting into position.

    Choose from the following:
    12RTD - RTD Torque Drivers with Rotary Slip Clutch Mechanism
    Accuracy: +/-3%, Capacity: 2-12 kgf.cm (0.1 graduations), Overall Length: 120mm. 5 in stock.
    PRICE: $ 95.00 US

    100LTD/RTD100z - LTD Torque Driver Non-Rotary Slip Clutch Mechanism, Micrometer Adjustable
    Accuracy: ±3%, Capacity: 20-100 in.oz (0.5 graduations), Overall Length: 3 1/2". 3 in stock
    PRICE: $ 145.00 US

    Tweezers - Special Purpose
    $ 3.00 US  Please visit: www.torontosurplus.com for further details.
    Length: 4" ea.
    NEW!
    $ 3.00 US

    U

    U.S. Army Field Tool Kit Model # TE - 50B
    Call for price  Please visit: www.torontosurplus.com for further details.
    A real collector's item.
    This antique set includes - Multimeter, screwdrivers (various sizes and types), flashlight, hammer, oil can, tape measure, manuals and instructions, and much more.
    Dimensions of Case: 24" W, 5 1/4" H, 13" D
    Call for price

    (Photo shy) 

    USA Punches
    Call for price  Please visit: www.torontosurplus.com for further details.
    Approximately 3/8" x 5" length.
    :We have about 100 of these new, unused pieces.
    Call for price

    V

    W

    Wright Heavy Duty 3 Ton Chain Fall
    $ 165.00 US  Please visit: www.torontosurplus.com for further details.
    This 3 ton capacity chain fall weighs 170 lbs.
    $ 165.00 US

    X

    Y

    Z

    Updated: July 21, 2008
    © 2008 Toronto Surplus & Scientific Inc.