Avestin EmulsiFlex-C5 High Pressure Homogenizer
Avestin’s C5 lab scale homogeniser rapidly reduces particles and droplets from micron to nanometer sizes. This precision Emulsiflex system is based on the principle of dynamic high pressure homogenisation.

The C5 has an air driven pump – providing homogenising pressure up to 30,000 psi (207 MPa). The maximum flow rate is 5L/Hr, with a minimum processing volume of 7ml, and a hold back volume of less than 1ml.

The EmulsiFlex-C5 homogenizer has an air/gas driven, high pressure pump developed and manufactured by AVESTIN. There are no "O"-rings or gaskets in the entire path of the product. The only plastic seal is the plunger seal which is UHMWPE (Ultra High Molecular Weight Polyethylene). Quiet operation is due to a specially designed pump motor pilot valve.

Model: EmulsiFlex-C5
Capacity: 1-5L/hr., depending on pressure
Min. Sample Volume: 7mL
Homogenizer Pressure: 30,000 PSI/207 MPa max
Filter Pressure: 5,000 PSI/25 MPa max

Baxter Revco Ultra-Tech FD301S FD-301S CO2 Incubator, Model FD301SAUA

• External Dimensions: 43"W x 25.5"D x 40" H (including feet)
  Internal Dimensions: 25"W x 21.5"D x 29"H
• CO2 Input: 15 PSIG max
• Second Line: 20 PSI Max
• Door Temperature Knob: 0-10
• Glass door behind main door
• Power: 115 VAC, 60 Hz, 5.0 Amps, 1 phase
• Terminal Strip for External Temperature Recorder, CO2 Recorder & Remote Alarm (not included)

Burnsco BTHC-3P-3/4-3/4 Benchtop Temperature & Humidity Chamber
Temperature Range: -65C to +177C
Humidity Range: 15-95 % RH
External Dimensions: 28" W x 33" D x 38" H
Internal Dimensions: 20" W x 16" D x 18" H
This Chamber is in Excellent, Barely used Condition and comes with the Manual.

Specifications available upon request.
$ 11500.00 US

Filtrine PC-25A Liquid Process Chiller
PC - ONE PASS CHILLERS
A completely packaged liquid chiller designed for applications where the liquid to be cooled passes through the chiller only once before either being added as an ingredient to a product or fouled by the product it is cooling. It is most important that a single pass chiller be able to chill liquids at high and low flow rates without significant pressure drop or danger of freeze up and yet have close, accurate temperature control. Filtrine PC chillers are specifically designed for one pass cooling. A high transfer immersion coil evaporator supplies maximum capacity at any fl ow rate with no pressure drop. Storage tank design permits close temperature control without short cycling.

SPECIFICATIONS:
• Temperature Range: 40°F - 100°F / 5°C - 37°C
• BTU/Hr: 2350
• HP: COMP 1/4, FAN 16 W
• AMP: COMP RLA 7.2; LRA 29.0; FAN 0.80
• MCA 9.8   MOP 17.0   REFRG R22 17 oz
• POWER: 115 VAC, 60 Hz, 1 Phase
• Test Pressure (PSI): High Side 300#; Low Side 150#
• Dimensions: 16"W x 22"H x 24"D
• Flow Type: One Pass

Fisher 285A Isotemp Vacuum Oven
This Fisher Isotemp oven in great condition. It comes with two oven racks.

SPECIFICATIONS:
• Temperature Range: up to 200°C / 392°F
• Outer Dimensions: 21"H x 18"W x 22"D.
• Chamber Dimensions: 11.5"H x 11.5"W x 19"D.
• Chamber Capacity: 1.6 cu ft
• Supply: 115V, 50/60 Hz 14.2A

Fisher 725G Microprocessor Gravity Oven

SPECIFICATIONS:
• Temperature Range: 50° to 275°C
• BTU per Hour (200°C): 2750
• Resolution: 1°C
• Exterior (L x W x H): 23 1/2 x 25 3/4 x 26 in. (60 x 65 x 66cm)
• Chamber (D x W x H):18 x 18 x 131/2 in. (46 x 46 x 34cm)
• Chamber Volume: 2.5 cu. ft
• Electrical Requirements: 120V 60Hz, 11A, 1300w

Hotpack 3103D Dry Wall CO2 Humidity Incubator
Hotpack's Dry Wall CO2 Incubator features microprocessor controls and an automatic self-decontamination cycle that, when programmed, automatically decontaminates the chamber using 121°C temperature and elevated humidity. It utilizes a dry-wall design with an external steam generator to boil water outside the chamber and provide a source of clean humidified air. Efficient mechanical convection directs air flow within the chamber. This design provides superior uniformity of temperature, humidity and CO2, allows rapid temperature recovery and eliminates the internal water reservoir that can be an internal source of contamination.

SPECIFICATIONS:
• Customized with Access Door in back
• CRS Robotics Carousel Microplate Carousel --- (motor S00846)
• Temperature Range: Ambient 35-60°C, via Watlow 989 Controller
• Humidity Range: 70 - 96%, via Watlow 989 Controller
• CO2 Range: 0 - 20%, via Watlow 989 Controller
• Inner Glass Door
• 9.7 Cubic Feet Capacity
• Interior Dimensions: 30"W x 22"D x 26"H
• Outside Dimensions: 44"W x 27"D x 35"H
• Weight: approx. 400 lbs
• Power requirements: 115 VAC, 60 Hz, 12 Amps, 1 Ph
  

Hotpack 317562 Dry Wall CO2 Humidity Incubator
Hotpack models utilize a dry-wall design with an external steam generator to boil water outside the chamber and provide a source of clean humidified air. Efficient mechanical convection directs air flow within the chamber. This design provides superior uniformity of temperature, humidity and CO2, allows rapid temperature recovery and eliminates the internal water reservoir that can be an internal source of contamination.

The 33 cu.ft. models feature a self-decontamination cycle to automatically decontaminate the chamber between experiments and exclusive Quadraflow™ mechanical air convection system that provides gentle laminar air flow in the product area.

SPECIFICATIONS:
• Temperature Range: Ambient +5° to 60°C
• Humidity Range: 70 - 98%
• CO2 Range: 0 - 20%
• Inner Glass Door
• 33 Cubic Feet Capacity
• Interior Dimensions: 36"W x 27"D x 60"H
• Outside Dimensions: 41"W x 35"D x 90"H
• Weight: approx. 980 lbs
• Power requirements: 115 VAC, 60 Hz, 15 Amps, 1 Ph
  

Jewett Refrigerator UC-5-CW UC5 Refrigerator, Stainless Steel with 2 Shelves
115 VAC, 50 Hz, 1 phase

Interior Dimensions: 20"W x 20"D x 21"H
Outside Dimensions: 24"W x 26"D x 35"H
$1100.00 US

Lab-Line Model 3495M-1 Ultra Clean 100 Convection Oven with 2 Shelves
Programmable Control Panel
Click Here to see a close-up of the panel.

SPECIFICATIONS:
• Max temperature: 250°C
• Input: 240V
• Rise Time to 200°C: 18 minutes
• Temp Control at 100°C: ±0.1°C
• Temp Control at 200°C: ±0.2°C
• Temp Uniformity at 100°C: ±1.0°C
• Temp Uniformity at 200°C: ±1.5°C
• Chamber Dimensions D 18" x H 19.5" x W 18"
• Adjustable 2" (5.1 cm) diameter exhaust port with damper control.
• 3" (7.6 cm) of silica-based insulation between oven chamber and exterior walls minimizes heat radiation to surrounding environment.

Lab-Line Model 3495M-1 Ultra-Clean Imperial IV Microprocessor Convection Oven with 2 Shelves
Non-Programmable Control Panel
Click Here to see a close-up of the panel.
This oven maintains "class 100" conditions without the use of filters. It provides operating temperatures up to 250C. Microprocessor based, digital set temperature control with sensor. Mechanical convection circulates air throughout the chamber. To meet strict requirements of semiconductor/electronic component manufacturing etc. Single program controller - 2 ramps & 2 dwells (ramp adjustable from 0.01C/Min, dwell from 0-9999 min).
220 V, 12.5 Amp, 50/60 Hz
$ 3275.00 US

Lab-Line Model 3608 / 3608-5 Vacuum Oven

FEATURES:
• Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.
• 3" (7.6 cm) glass wool insulation prevents heat loss from working chamber.
• Silicone door gasket and positive latch door maintain seal at all vacuum levels.
• Exclusive polycarbonate safety shield protects door glass.
• Vacuum fittings require .25" (.6 cm) I.D. tubing.
  
  SPECIFICATIONS:
• Operating Temperature Range (from ambient): +5^oC to 220^oC (428^oF)
• Temperature: LED displayed in 1^oC increments
• Vacuum Level: Gauge, from 0 to 30" Hg
• Outer Dimensions: 16" H x 20" W x 16.5" D
• Chamber Dimensions: 10" H x 10" W x 12" D
• Chamber Volume: 0.7 (19.8)

Leco SC32 Sulphur Determinator for Soil Sample Analysis / High Temperature Furnace, Infra-red Detector ASTM 4239
Additional photos available upon request.
Call for price

Lindberg / Blue M 54253 Heavy Duty Tube Furnace, Single Zone 1500°C with 59645 Controller
Lindberg single-zone tube furnaces are designed for use where exceptional radial and linear temperature uniformity, process repeatability, rapid heat-up and response are critical.

FEATURES & SPECIFICATIONS:
• Solid design that incorporates double-end silicon carbide heating elements mounted above and below the furnace chamber
• Heating elements cross the chamber at right angles with closer spacing at the chamber ends than in the center
• Removable side panels
• Chamber constructed of high-temperature graded insulation
• Insulating vestibules at the ends of the heated chamber
• Dimensions: Chamber Size / Bore ID x L: 2" Inner Diameter x 24"L
• Overall Dimensions, 32" x 20" x 19"
• Weight approx: 370 lbs
• Watts: 6857
• Volts: 240, 50/60 Hz
  
  

Lindberg / Blue M 56622 Crucible Furnace, Single Zone 1200°C with 59344 Controller
Designed to deliver outstanding high-temperature performance, crucible furnaces from Blue M incorporate the most recent technological advances. Efficient heating element designs, high-temperature graded insulation and advanced temperature controls combine to deliver dependable, long-life heat sources. Each furnace is designed for ease of maintenance, convenience of operation and exceptional performance

FEATURES & SPECIFICATIONS:
• Dimensions: Top Vestibule: 5" Inner Diameter x 8" Heated Depth
• Overall Dimensions, 16.5" x 14" x 14"
• Watts: 1700
• Max Temp 1200°C
• Volts: 240, 50/60 Hz
• Weight approx: 50lb
  
  

Lindberg Blue M 56953 Heavy Duty Crucible Furnace with 59645 Controller
This 56000 series Linberg crucible furnace has a max temp. of 1500°C. It is designed for vertical heat processing requirements and laboratory melting applications. Lower outer surface temperatures are aceived through the use of double shell construction. The heated chamber is constructed of high-temperature graded refractory insulation.

• Furnace Type: 56953, Max Temp. 1500°C, 240V, 50/60 Hz, 6800W
  
• Chamber Dimensions: 9" x 12"
• Overall Dimensions: 33quot;H x 35quot; x 35quot;
• Max Temp: 1500°C
• Power: 240 VAC, 6800 W
• Weight approx. 700 lb
• Thermocouple: Plat./Plat.-13% Rhodium ( not included)
  
  

LPM Liquid Plastic Mould Injector / Extruder Model QTH60B1
This unit is used for injection moulding of plastic for cable lines and fittings.
It comes with three tools, which are presumably for cleaning out the opening.
This Liquid Plastic Mould Injector consumes 5000W of power at 120V 50/60Hz & accepts air pressure intake at 50 psi max..
$ 350.00 US

Medi-Plus Medi-Oxide Self-Sealing Tyvek Sterilization Pouch 98 Series 98-54828, 98-54829, 98-54830, 98-54834
Medi-Oxide sterilization pouches are indicated for low temperature sterilization methods such as hydrogen peroxide gas plasma, ethylene oxide gas, and peracetic acid. These products feature the strength and clean peel of Tyvek along with Medi-Plus high grade film for optimal performance.

FEATURES:
• Medi-Oxide self-sealing pouches feature the Medi-Plus patented pre-fold for easy, accurate sealing, which provides a complete bacterial barrier.
• No need for an additional low-temperature heat sealer required to seal Medi-Oxide Tyvek pouches.
• Unique angled graphics on Medi-Oxide pouches allow users to differentiate from paper pouches to help prevent accidental use in high temperture steam autoclave.
• Medi-Oxide pouches come in popular sizes for all your requirements.
  
  These pouches can be used with the 3M 8XL sterilizer below.
  
  98-54828: 5.25" x 10.25" 100/box - $ 9.95/100
  (13 full boxes + 1 partial)
  
  98-54829: 7.5" x 13.5" 100/box - $ 14.00/100
  (9 full boxes + 1 partial)
  
  98-54830: 12" x 15.5"  100/box - $ 25.00/100
  (1 full boxes + 1 partial)
  
  98-54834: 4" x 24"        - $ 9.75/65
  (1 partial box)

Nortec 303 SL Steam Cylinder / Steam Tank for Steam Type Humidifier BRAND NEW in Original Box

$ 175.00 US

Nortec 403 / 421 Steam Cylinder / Steam Tank for Steam Type Humidifier BRAND NEW UNIT!!!

This cylinder operates on 208-240V 3phase.
Brand New, but the plastic is a bit scuffed on the outside.
$ 215.00 US

Precision Thelco Oven Model 14
This oven is in great condition and can reach temperatures up to
150°C / 302°F.
Due to its small size and large chamber this oven is perfect for any lab.
Outer Dimensions: 18"H x 11"W x 11.5"D.
Inside Dimensions: 12"H x 10"W x 11.5D".
$ 295.00 US

Precision Thelco Oven Model 16
The oven has a maximum temp. of 200^oC & runs on 110V at 50/60 Hz.
Outer Dimensions: 23.5"H x 18"W x 17"D.
Inside Dimensions: 13"H x 13"W x 15"D.
$ 375.00 US

Precision Thelco Oven Model 26
This unit has a max. temperature of
200^oC, 392^oF.
This oven has been modified to have a port in the door.
With a little work a glass window can be added for viewing oven contents,
or the face plate can be left in place.
1 Baseplate
Outer Dimensions: 26"H x 18"W x 17"D
Inside Dimensions: 13"H x 13"W x 13"D.
Port Dimensions: 9.75"H x 6.75"W.
With bonus bulkhead multi-pin connector array
$ 350.00 US

Precision Thelco Oven Model 26 cat no 31540
The oven is in great condition and can reach temperatures up to
225^oC, 437^oF.
Outer Dimensions: 26"H x 19"W x 18"D.
Inside Dimensions: 13"H x 12.5"W x 13.5"D.

$ 350.00 US

Tek-Temp MM2500 Recirculating Chiller, 2 Channel, 5000 BTU

• Model: MM2500/5K/T1/P0
• Volts: 208/230V
• Phase: 1
• B.T.U: 5,000
• Amps: 30
• Hz: 60
• Ounces: 26
• 2 Channel
  $ 3475.00 US

Tenney Engineering 4D4 Environmental Test Chamber

FEATURES:

• 3 N-type feed through posts
• 24 single conductor feed through posts
• 8" viewport
• chamber dia: 48" x 52"long

Call for price

Thermolyne F-6020 F6020 Muffle Furnace, Series 60
The interior looks great, but the exterior won't win a beauty contest.

• Interior dimensions are approx.: 12.5" W x 7" H x 10" D
• Exterior dimensions are approx.: 21" W x 18" H x 18" D
• Maximum Temperature of unit is 1200°C
• 240 VAC, 17 Amps, 4080 Watts, 50/60 Hz, 1 Phase
• Weight approx 140 lbs

Thermotron ATS-100-3-3-LN2 Thermoshock Environmental Chamber / Thermal Shock Chamber
Exterior Dimensions approx: 102"W x 31"D x 75"e'H Power: 208V, 3 Phase
Refrigerant: R-502, 3 lbs, HFC-507 & HFC-23
Call for price

VWR Scientific 1410 Vacuum Oven
40 to 225°C
120 V, 600W.
Inside Dimensions: 8.5"H X 8.5"W X 12"D.
$ 1495.00 US

Wild Barfield Kiln / Furnace - Max Temp. 850^oC (1560^oF)
This is a Wild Barfield, Applied Heat Company Kiln.
It has an 8 step temperature control & operates on 220V, 60 Hz, 12 KW, Single Phase.
Chamber Dimensions: 20" W x 24" D x 20" H (at edges) or 23" H (in center)
$1,799.00 US