Bimba 091-P Bore Air Cylinder / Pneumatic Cylinder
Bore: 1 1/16"
Stroke: 1"
Body: Stainless Steel
Rod: Carbon Steel
Single Acting
Pivot Type
Spring Return
Rear Pivot Mounting
7 In stock.
$ 12.00 US

Dover DMM 2100 High Precision Positioning Unit
A Dover DMM2100 Servo Controller put to good use on a 4'x3' granite slab. This unit was specially designed for CD work but is ideal for any application that needs accuracy and reliable positioning.
Click HERE for additional / larger photos.
Call for price

Festo 178564 P4 (004) & 163139 P2 (004) Cables

• 178 564 P4 (004) - Type KVI-CP-1-WS-WD-0.5, Terminal connection cable WS-WD, 0.5m - 2 in stock
• 163 139 P2 (004) - Type KVI-CP-1-WS-WD-2 Cable 6.5 ft /2 m, Angle connector (angle plug) - 1 in stock

Festo CP-E16-M12x2-5POL Input Module 16-Fold, 8 x M12 5Pin

FEATURES:

• 16 inputs 24 V DC
• Signal status display via 16 LEDs
• Operating status display
• M12 plug, double allocation
• 1x M9 CP connection

Festo CPV14-GE-FB-8 Adapter Fieldbus 8-Fold & CPV14-VI Valve terminal CPV14-VI
1 in stock
Call for price

Festo IFB8-03 BUS Node 1771 RIO BUS Control Block with VIGCP-03-FP & IEPL-03-FB End Plate
We don't have specs, but it is in great condition, and if you're looking for a replacement you've come to the right place.
1 in stock
Call for price

Hennells GMA-MF1-BR Pneumatic Cylinder - Stroke: 3"
Rated for 250 psi
Bore: 1 1/2"
Body Dimensions (not including nuts/rods etc.): 7" x 2.5" H x 2" W (front plate - 3 1/2" W)
6 in stock
$ 40.00 US

Hennells GMA-MT1-BR Pneumatic Cylinder - Stroke: 6"
Rated for 250 psi
Bore: 3 1/4"
Body Dimensions (not including nuts/rods etc.): 10 1/2" x 3 3/4" x 3 3/4"
2 in stock
$ 90.00 US

IMC Camco 601RDM 601RDM6H24-270 6 Position Indexer & Controller with Baldo Motor

INDEXER CAPACITIES:

• Stops (S): 6
• Index Period (β)
• Motion: ms
• B₁₀ Capacity at 50 RPM (in-lb) 4025
• Internal Inertia (lb-in²112
  
  TECHNICAL SPECIFICATIONS
  
• Output Load Capacity - loads carried during index: Radial 910 lbs, Thrust/Axial 2270 lbs, Moment 3180 in-lbs
• Accuracy ±39 arcsec / ±003" at 18" Radius
• Repeatability ±22 arcsec / ±.002" at 18" Radius
  
  Gearbox Motor Size: 180sm, Ratio: 20 to 1
  Plate Sold Separately: 20"&dia;, 3/4" thick steel
  $ 1500.00 US

Jesco N-1494-A Pneumatic Cylinder
Bore: 1 1/2" with 1/8" NPT air port.
Call for price

Kamo Seiko MINIDEX MD50-4 Miniature Precision Air Rotary Index Actuator
The Kamo Seiko MINIDEX is an extremely small intermittent motion pneumatically driven actuator. The MINIDEX offers double ended output shafts that are incorporated in a manner that allows the use of an integrated pneumatic drive with both indexing and positioning capability as standard. Stop positions of the MINIDEX are exact with the use of internal locking pins and contribute to accuracy of positioning and repeatability without overrunning or external stops. The compact cylindrical form factor of the MINIDEX allows for installation in limited space without sacrificing performance or accuracy. Available in various stop locations per revolution of output shaft, the MINIDEX is a versatile device unmatched by another device of its size.

SPECIFICATIONS:
• Index Number: 4 Stops
• Index Accuracy: +6 arc minutes
• Index Speed: 1.0 seconds (no load)
• Maximum Air Pressure: 7 kg/cm² (100 psi)
• Index Torque: Air Pressure Dependant
• Minimum Holding Torque: 11.7 N•m (100 lb•in) at 60 psi
• Load Inertia: 1000 kg•cm² (0.885 in•lb•sec²)

Miller Fluid Power A72B2B Pneumatic Cylinder - Stroke: 3 1/2"
Rated for 250 PSI Bore: 2 1/2" Rod Diameter: 5/8"
Call for price

Miller Fluid Power A72B2B Pneumatic Cylinder - Stroke: 7"
Rated for 250 PSI Bore: 3 1/4" Rod Diameter: 1"
$ 40.00 US

Miller Fluid Power A72B2B Pneumatic Cylinder - Stroke: 8"
Rated for 250 PSI Bore: 3 1/4" Rod Diameter: 1"
$ 40.00 US

Miller Fluid Power A74B2B Pneumatic Cylinder - Stroke: 4"
Rated for 750 PSI Bore: 2" Rod Diameter: 5/8"
$ 90.00 US

Miller Fluid Power A74B2N Pneumatic Cylinder - Stroke: 1 1/4"
Rated for 250 PSI Bore: 1 1/2" Rod Diameter: 5/8"
Call for price

Miller Fluid Power A84B2N Pneumatic Cylinder - Stroke: 2"
Rated for 250 psi Bore: 2 1/2" Rod Diameter: 5/8"
$ 40.00 US

Miller Fluid Power A86B2B Pneumatic Cylinder - Stroke: 2"
Rated for 250 psi Bore: 1 1/2" Rod Diameter: 5/8"
Call for price

Miller Fluid Power A86B2B Pneumatic Cylinder - Stroke: 3"
Rated for 250 PSI
Bore: 1 1/2" Rod Diameter: 5/8"
Call for price

Miller Fluid Power A86B2B Pneumatic Cylinder - Stroke: 6"
Rated for 250 PSI Bore: 1 1/2" Rod Diameter: 5/8"
Call for price

Miller Fluid Power H61B2B Pneumatic Cylinder - Stroke: 4"
Rated for 1850 PSI
Bore: 4" Rod Diameter: 1 3/4"
Body Dimensions (not including nuts/rods etc.): 10 1/2" x 5" x 5" (front plate - 7 1/2" W)
Brand New!!
1 in stock
$ 90.00 US

Miller Fluid Power H61B4B Pneumatic Cylinder - Stroke: 8"
Rated for 1720 PSI
Bore: 3 1/4" Rod Diameter: 1 3/8"
Body Dimensions (not including nuts/rods etc.): 14 1/4" x 4 1/2" x 4 1/2" (front plate - 7 1/4" W)
$ 125.00 US

Miller Fluid Power J84B2B Pneumatic Cylinder - Stroke: 7"
Rated for 1500 PSI
Bore: 2 1/2" Rod Diameter: 5/8"
$ 160.00 US

Parker J2ANU18A Pneumatic Cylinder - Stroke: 1"
Rated for 250 psi, Bore: 2.0"
Call for price

Parker Series S Pneumatic Cylinder
Rated for 200 psi, 1.12 x 1.00
Call for price

PHD NPGMS913/8x5 Pneumatic Cylinder
Features a non-rotating piston rod
Call for price

Pressotechnik S 30.30.70.6 TOX-Powerpackage Pneumatic Intensifier with 6" stroke, 6 bar, 270 kN
TOX-Powerpackage, the energy saving Pneumatic intensifier with integrated oil system and automatically activated powerstroke. Patented power bypass with integrated retract hydraulic cushion is a standard feature.

The technology combines Pneumatics and Hydraulics providing you with the following advantages: