Airco Temescal TP-10100 Time Power Controller

Call for price

Allen Bradley 1746-IB16 DC Input Module for SLC 500
16 Input, DC-Sink, 24V
2 in stock - Mint like condition.
$ 95.00 US each

Allen Bradley 1770-KF2 Series C, REV 5 Data Highway Communication Interface
Communication interface that links intelligent RS-232-C or RS-422-A (asynchronous) devices to an Allen-Bradley local area network. By setting switches on the KF2, and changing cables, you can direct communications over a Data Highway or a Peer Communication Link (PCL). With a 1770-KF2 module, a computer on a PCL can communicate with any PLC-5 node on the network.
Interface Only.
Call for price

Allen Bradley 1770-SB Data Cartridge Recorder
The 1770-SB is a portable recording device used to record and load user programs into PLC-2, PLC-3, and PLC-4 Programmable Controllers; series 7100 and 8200 Computerized Numerical Controllers; and series 8200 Robot Controls. The 1772-TH cable is used to connect the 1770-SB to a Industrial Terminal System or to a PLC-4 Microtrol Controller, PLC-2, PLC-3, and series 7100 CNC can be connected to the Industrial Terminal System
Includes Command Summary Booklet, 1772-TH Interconnect Cable, T-DPG05 Interconnect Cable (tape to basic module) and power cord.
This unit is Firmware Rev B, Series B and is in extremely good condition.


$ 2500.00 US

Allen Bradley 1775-CX PLC-3 Expansion Cable Set, Set of 4 Cables for a Four Processor Chassis System w/50 Pin Connectors

Call for price

Allen Bradley 1775-LX PLC-3 Expansion Module
1 in stock
Call for price

Allen Bradley 1775-MR8 PLC-3 CMOS RAM Memory 32K Words Module
1 in stock
Call for price

Allen Bradley 1775-S4A Series B PLC-3 I/O Scanner-Programmer Interface Module
1 in stock
Call for price

Allen Bradley 1785L11B A PLC-5/11 Processor Module / Enhanced Programmable Controller - Brand New in Original Box
Every PLC-5 controller offers built-in, configurable ports for Data Highway Plus (DH+) or Universal Remote I/O. A DH+ connection supports remote programming and information access, in addition to peer-to-peer communication between the PLC-5, other controllers and devices. A Universal Remote I/O connection supports real-time data exchange for I/O, operator interface, and other third-party devices.

FEATURES:
• configurable ports for DH+ or Universal remote I/O
• configurable RS-232, 422, 423A serial port
• advanced instruction set
• multiple main control programs
• processor input interrupts
• selectable timed interrupts
• global status flags
• programmable fault response
  
  Enhanced PLC-5/11(1785-L11B) Controller:
  
• Maximum User Memory (words):8K
• Total I/O Maximum Channels: 512 any mix or 384 in + 384 out (complement)
• Channels: 1 DH+/remote I/O

Allen Bradley PanelView 900 / 2711-T9C1 Ser C, Rev F Touchscreen / Operator Interface, 4MB Mem, RS-232, RIO, Mount Clips
100-240 VAC, 0.85-0.46 Amp, 50/60 Hz, 110 VA
Outer trim dimensions: 13 1/4" W x 9 3/4" H x 6"D. This panel will fit into a hole 12" W x 8 3/4" H
1 in stock.
$1200.00 US

Allen Bradley SLC-500 1700 Series PLC Modules ( 1747 , 1746 , SLC5 )
SLC 500 1747-L40C Processor Unit 40 I/O Fixed Hardware Style with SLC500 1746-A2 2 Slot Expansion Module with 1 Output 1 Blank
Call For Price

SLC 500 1747-L40C Processor Unit 40 I/O Fixed Hardware Style with SLC500 1746-A2 2 Slot Expansion Module with 1 Output 1 Input
Call For Price

SLC 500 PLC with 1746-P1 Power Supply, 1746-A7 7 Slot Rack, 1747-L532 SLC 5/03 CPU, 2 x 1746-IB16 DC Sink Input, 2 x 1746-OB16 DC Source Output, 1746-SN Remote I/O Scanner & 1746-HSTP1 Stepper Control
Call For Price
$1800.00 package

SLC 500 1746-P1 Power Supply with 1746-A7 7 Slot Rack with 7 Modules SLC 5/01 CPU, 3 Input, 2 Output, 1 Empty
Call For Price

SLC 500 1746-P1 Power Supply with 1746-A7 7 Slot Rack with 7 Modules SLC 5/01 CPU, 2 Input, 2 Output, 2 Blank
Call For Price

SLC 500 1746-P4 Power Supply with 1746-A7 7 Slot Rack with 7 Modules SLC 5/03 CPU, 2 Input, 2 Output, Scanner & Stepper
Call For Price

Please Adv Which Configuration for Price

ATI Industrial Automation Force / Torque Sensor System Controller with Six-Axis Gamma Force/Torque Transducer
The F/T sensor system measures the full six components of force and torque (Fx, Fy, Fz, Tx, Ty, Tz) using a monolithic instrumented transducer. The F/T transducer uses silicon strain gauges for excellent noise immunity. The use of silicon gauges allows the F/T transducer to have high stiffness and increased overload protection.

BENEFITS AND FEATURES:
Extremely High Strength:
• Precision machined from high-strength aluminum.
• Maximum allowable overload values are 7.8 to 27 times rated capacities. High Signal-to-Noise Ratio:
  
• Silicon strain gauges provide a signal 75 times stronger than conventional foil gauges. This signal is amplified, resulting in near zero noise distortion.
  
  TYPICAL APPLICATIONS:
  
• Real-time force control
• Haptics feedback
• Prosthetic device testing
• Robotic assembly
• Automotive part testing

Biorad 013-3581 Joystick Controller

Call for price

Cognex DVT 510M Legend 510 Machine Vision SmartImage Sensor CMOS Camera
The Legend 510 can measure, count, find features, compare patterns. comunication drivers to robotics, PC-based control systems and other automation devices are built into the Legend 510.
Industries using DVT: Automotive, Biomedical, Food.Beverage, Plastics, Pharmaceutical, Packaging & Semiconductor.
Typical Inspections: Presence/Absence of parts in an assembly, Presence/Absence of features in a part, Counting and sorting of parts, Precision measurement.

2 in stock, no cables, power supply or software.

CS Mount Lens, 10mm extension, 1:1.6, 25mm, &dia25.5, f1.6-16, Focus & Iris Operation: Manual with lock
** Lens Sold Separately **
Call with price

Cognex DVT IDRA-D Smart Light Red Light Array, Diffused
For use with DVT 500 and In-Sight 5000 Series.
Comes with 1 metre cable
2 in stock
$ 235.00

Cognex DVT IS-5RC Legend IS Smart Image Sensor / Intelligent Scanner CCD Imager / CS Lens Mount
Intelligent Scanner for 1D/2D Barcode reading applications, OCR, and OCV. Add power to your code reading with the Intelligent Scanner. The IS-5RC has an integrated LED Ringlight, CS Lens Mount and RJ-45 for 10/100 Mbps Ethernet communications.

2 in stock, no cables, power supply or software.

CS Mount Lens, 20mm extension, 1:2.8, 50mm, &dia25.5, f2.8-16, Focus & Iris Operation: Manual with lock
** Lens Sold Separately **
Call for price

Compumotor Microstep Drive, AX-Series: AXL-Drive
Servo Motor Controller
Input power: 115 VAC. 16 indexer and 11 encoder inputs for position feedback.
Made in U.S.A. by the Compumotor Divison of Parker Automation Technologies.
$ 199.00 US As Removed From Service

Condec Unimation Robotics 923EJ1 Teach Pendent

$ 300.00 US

Controlled Power Company Power System Analyzer
120/280V 3 phase
$ 3,500.00 US

Controller
Autosampler Interlock Jack, High/Norm Viscosity Switch,
Card Edges for External Control & Injector Unit.
We have 4 of these units in stock.
$ 275.00 US

Danfoss VLT 5008 / VLT5008 Variable Speed Drive / VLT Frequency Converter
Model: VLT5008PT5C4STR0DLF20A00, 176F2739

• IN: 3x 380-500V 50/60 Hz, 12.2 Amps
• OUT: 3x 0-V in, 0-1000 Hz, 5.5 kW / 7.5 HP, 13.0 A, 380-440 V, 11.0 A 460-500 V

General Radio 1701-AK Speed Controller
For - 1/15 HP, 115 VDC Motors
Input 115 V, 60 Hz, Field 0.2 Amp max, Arm 0.8 Amp Max.
Switchable: On/Off, Forward/Reverse & 0-3450/-0-1725
Dial Speed Control: 0-10.
Call for price

Industrial Pneumatic CD Equipment Controller
Made by TEMIC
Call for price

Itran MVP-2000 Machine Vision Processor, Processor Board Rev B14
Heavy duty, wall mount unit with tool logic module and
lights showing: system, status, run, execute & power.
$ 750.00 US as-is

Matrox AID-3 Remote Input Keypad
Made by Advanced Input Devices, we have eight of these brand new numeric keypads in stock. % pin din connector for input to computer.
$ 9.95 US

Melcor MTTC1410 MTTC-1410 Thermoelectric Temperature Controller - MINT Condition
The MTTC-1410 Thermoelectric Temperature Controller is a precision instrument that utilizes Pulse Width Modulation (PWM) control technology to provide accurate temperature control of thermoelectric devices. The MTTC-1410 is a bi-directional controller with selectable voltage output and a full "H" bridge capable of load currents of up to ten amperes. The unit’s LED front control panel can be used to adjust the setpoint temperature, to view the current temperature, or to fine-tune the control parameters for higher accuracy or faster response.

SPECIFICATIONS and FEATURES

• Input Power: 110(2A)/220VAC(1A), 50~60Hz
• Range of selectable DC output voltages: 3, 7, 12, and 14 VDC (PWM)
• Maximum Output Current: 10A
• Control temperature range: -100°C to 200°C
• Control stability: 0.1°C/24h
• Temperature sensor: 2-wire Pt1000 RTD (NOT included)
• Control output: Proportional control with automatic reset and rate (PID), 500 Hz Pulse Width Modulation (PWM)
• Dimensions: 15cm (5.9in) x 12.5cm (4.9in) x 26cm (10.2in)
• 3.5 digit LED display, 4-button user interface
• Extra terminals for constant 12VDC fan operation (up to 1 Ampere)

Newport INF7 Infinity Rate Meter / Totalizer / Clock / Batch Controller
The INF7 is the ultimate 6-digit multi-functional process indicator/ controller. Each unit can be easily configured via the front-panel pushbuttons or optional serial communication boards, to be used as a ratemeter/totalizer, batch controller, or real-time clock.
Model INF7-01000-R/E: 115 Vac power, Red LED display, Isolated pulse input with excitation, 5 open-collector transistors, No analog output, No serial output, Rate/Total factory default.
Specifications Available Upon Request.
Call for price

Nicolet Spectrometer Control Unit
Includes SCSI interface, Storage module device interfaces, and a spectrometer interface
Call for price

Omron E5CK-AA1-302 Digital Process Controller with DeviceNet

FEATURES:
• Advanced digital process controller with Fuzzy Logic.
• Field configurable outputs and options.
• 100 ms sampling (for analog input).
• Advanced PID or fuzzy self-tuning.
• Water-resistant, NEMA 4X, IP66.
• Remote set-point with optional event input board.
• Set-point ramp.
• Front panel programming. Heat only or heat / cool control.
• Auxiliary SPDT output standard.
• Power is 100 to 240 VAC

Omron F350 Vision Mate Controller

This Controller Consists of:
• Vision Mate Base
• F300-P Power Supply
• F350-C10E Image Processing Unit
• F300-A20 Camera I/F Unit (4 Modules)
• F300-E RS232 I/F Unit
• F250-L100E OVL Unit
• F300-FM MMI UnitM
  Not Pictured:
  
• Computer Keyboard
• F300-KP Keypad
• F309-VS Camera Cable (8 cables)

Omron H3CR-A8 Solid State Timer - BRAND NEW IN BOX
Timing Function: ON-Delay or ON-Interval
Time Range: 1.2 s to 300 hr
Terminal Form: 8-Pin Round
Input Voltage: 100-240VAC, 50/60 Hz
Contact Output: AC100-240/DC100-125
Mode: A & E only.
See Below for Accessories

Complete Specs (26 pg PDF) available upon request.
$ 48.75 US

Omron H3CR-A8 Timer Panel Cover Y92P-48GB

$ 3.50 US

Omron H3CR-A8 Timer Panel mount adapter Y92F-30

$ 5.00 US

Omron H3CR-A8 Timer Socket P3G-08
8-Pin Round socket for timer in terminal form.

$ 5.50 US

Parker Compumotor Zeta4 Microstepping Drive
These microstepping drives are stand-alone, packaged microstepping drives that incorporate breakthrough techniques know as Active Damping and Electronic Viscosity. Designed for reliability, the ZETA drive family offers premier quality and performance while being easy to use and apply. The ZETA drive family meets the need for global solutions.

FEATURES:
PERFORMANCE

• Standard step-and-direction input or CW/CCW input
• Torque from 43 oz-in (0.30 N-m) to 3480 oz-in (24.4 N-m)
  Active Damping TM benefits:
  
• Damping ratios of up to 0.5
• Higher acceleration than conventional step systems
• Decrease motor vibration
• Increase shaft power
• Higher performance
  Electronic Viscosity TM benefits:
  
• Reduce settling time
• Increase slow speed smoothness (reduce velocity ripple)
• Reduce audible noise
  
  PROTECTION CIRCUIT
• Motor short circuits (phase-to-phase and phase-to-ground)
• Overtemperature
• Undervoltage
• Power dump (dissipates excess energy caused by load regeneration)
  
  

  PHYSICAL

• Input power: 95-132 VAC, 50/60 Hz, 0-4 Amps
• Drive status indicators: power, step input, over temperature and motor fault
• Removable connectors for easy installation
• Selectable damping for optimized performance

Promess Type ELP Industrial Controller
This rugged case contains a power supply, two controller cards and two programmable input modules in a lockable glass-sealed cover
$ 875.00 US

Schleicher SNO-2002-17 / SNO200217 24VDC Relay Safety Switching
CLICK HERE to see the data label.
10 in stock Made in Germany
$ 175.00 US

Security Dynamics ACM/100 HS Access Control Module
14 in stock
$ 125.00 US

Simpson 3300 Series 3324 Temperature Controller 0 - 600°F / Rugged Seal Meter Relay
4.5" panel meter style.
Type J Thermocouple
Single Setpoint Controller.
Specifications for dual setpoint available upon request.
Call for price

Simpson 3300 Series 3324 XA Temperature Controller 0 - 500°F / Rugged Seal Meter Relay
4.5" panel meter style.
Type J Thermocouple
Single Setpoint Controller.
Specifications available upon request.
$ 75.00 US

Spectra Physics SP4270 & SP4290 Integrator - Labnet 2 Channel RS-232-C Plug-In Packs
A3050-010 REV. A - Controller Plug-In with Module
A2556-162 - $ 399.00 US (1 pc)

A3050-010 REV. 1 - Controller Plug-In with Module
A3006-010 - $ 549.00 US (1 pc)

A3051-010 REV. 5 - Memory Module Plug-In with
Combo 1 Memory Module A3071-010 - $ 549.00 US (1 pc)

A3006-020 Data Capture Program Prom Module Only - Call for price

Note: Picture is of A3050-010

Superior Electric 2000 SS2000I-V Closed-Loop Programmable Motion Control / Indexer / Controller
The SS2000I-V is a high performance, programmable motion control specifically designed for use with SS2000D6 and SS2000D12 drives. It can also be used with any other SLO-SYN step motor drives as well as with most standard pulse and direction drives, including digital servo drives. The controls can be used to operate one drive, or they can operate two drives, one-at-a- time, in applications where simultaneous motion is not needed.

SPECIFICATIONS:
• Two axes of motion (one at a time)
• Separate acceleration and deceleration
• Velocity changes “on the fly”
• Breakpoint programming
• Choice of trapezoidal, “S” curve, or hyperbolic ramp profiles
• Mark registration accurate to+1 microstep
• Pulse outputs to 48 MHz
• Abundant, versatile, bulletproof I/O
• 16 inputs, 8 outputs
• Short-circuit proof outputs
• Built-in 24 VDC, 0.75 A power supply for I/O
• 400 lines of user program stored in BRAM
  Software not included.
• Input: 115/230 VAC, 50/60 Hz, 4 A

Taylor Indicating Controller
New - Unused - Still in Original Box
Input range of 0.25-1.25 V DC, output of 4-20ma.
Requires 117 Vac @ 60Hz 10 W
$ 800.00 US

TE Thermo Electric 3604031117 Temperature Controller 3100°F / 1700°C
The Temperature Range is 0-1700°C (0-3092°F) ISA-R. and is adjustable via the thumbwheels. It also shows +/- 25°C in the meter.
Call for price

Telemecanique Altivar 16 ATV16U18M2 Square D Motor Controller

SPECIFICATIONS:
INPUT:
• 208/240V
• Single Phase
• 50/60Hz
• 5.3/4.5A
  
  Output:
• 208/240V
• 3 Phase
• 4A
• Max transient (1mn): 5.4A
• Frequency: 0.1-200Hz
  
  Motor Rating: 1HP/ 0.75kW

Thermalogic Temperature Controller/Indicator
Model DINFJ4211-N-T-18 Rev. B 120 Vac
Range 68-122 degrees F.
$ 115.00 US

Xycom 9487 Industrial PC Controller with 10in LCD Display, Branson Ready Unit for Branson Ultra-Hy-Line Vibration Welde
The 9487 color NEMA 4/4X/12 Industrial Flat Panel Computers offer a compact, modular package, ideal for the factory floor and other harsh environments. The modular slide-out computer design makes the 9487 easy to maintain. A simple disconnect setup allows quick access to all system components for installation and maintenance. With its powerful features and rugged packaging, the 9487 brings maximum serviceability and reliability to the factory floor.

9487 Series Features:

• Preloaded with Windows NT® Workstation 4.0, SP6 and InTouch Man Machine Interface Version 6.0b NT
• 10.4" VGA flat panel display
• Touchscreen
• 5.62 inch (143 mm) mounting depth
• Hard drive
• Processor, 32 MB Memory
• Front access 1.44 MB floppy drive
• 19-inch EIA rack or panel mounting
• Programmable keypad keycodes
• Relegendable keypads with 20 function keys and 32 data entry keys
• Front panel status LEDs and diagnostics
• Power 90-250 VAC, 47-63 Hz, 2.1 A or 24 VDC power supply (not included)


Model: 9487
P/N 9487-2790019011000
Options: 710016-T-2.1G